1) Melting-crystal range
熔域
2) Zone melting
区域熔炼
1.
high purity indium was prepared by the method of a combination of electrolytic refining and zone melting.
采用电解精炼 区域熔炼法 ,获得了 99 9999%高纯铟。
2.
The methods of preparing high purity iron include solvent extraction,ion exchange,electrolytic refining,zone melting,and so on.
本文介绍了溶剂萃取、离子交换、电解精炼和区域熔炼等冶金提纯方法在高纯铁制备过程中的应用。
3) Zone Melting
区域熔融
1.
In order to improving the purity of the industrial product,antioxidant D was purified by the methods of Recrystalize and Zone Melting.
用重结晶和区域熔融法提纯制备标准物质用N-苯基-β萘胺(防老剂D)。
2.
In order to improve the purity of industrial product,Antioxidant BHT was purified by the methods of recrystalize and zone melting.
为提高防老剂BHT的纯度,采用重结晶和区域熔融法对工业品防老剂BHT进行提纯。
3.
In order to meet the demand of high-pure phosphoric acid and semiconductor industries, a combined theoretical and experimental approach was undertaken to find out the influences of zone length and times of zone pass on the solute distribution in ingot after the purification process of industrial yellow phosphorus by zone melting method.
为了满足高纯磷酸以及半导体等行业对高纯磷的需求,采用了区域熔融法对工业黄磷进行提纯,分析了区熔法提纯工业黄磷的原理,并根据所测有效分布系数建立整个区熔过程中杂质分布的数学模型。
4) zone melting
区域熔化
1.
Based on researching on the technique of continuous casting of single crystal metal,this paper puts forward the technique of manufacturing the single crystal metal wire with small diameter,which combines the technique of continuous casting of single crystal mental with the technique of zone melting.
在系统研究单晶连铸的基础上 ,提出小直径线材单晶化技术 ,该技术结合区域熔化技术和连续铸造技术 ,实现了“三个连续” ,即送料连续、加热熔化连续、引锭连续 。
2.
While using zone melting heated mould continuous casting method to produce single-crystal copper wire,the mould temperature field distribution,which is controlled by the different rate of heating power and traction,is the key factor.
利用区域熔化-热型连铸法制备单晶铜线材这项新技术中,能否通过控制不同的加热功率和牵引速度来控制铸型温度场的合理分布是成功生产单晶线材的关键。
5) zone-melting
区域熔炼
1.
The zone-melting temperature of YBaCuO tapes were decreased under 945□ by doping Ag and PbO in YBaCuO films, which made zone-melting process possible with Ag substrate not melted.
通过掺杂Ag和PbO的方法降低YBaCuO的区熔温度到945℃以下,从而能够在金属Ag基底上进行区域熔炼,获得有织构的超导带材。
6) Regional Smelt
区域熔炼
1.
Making the Metal in High Solidification by the Way of Regional Smelt;
区域熔炼法制备高纯度金属
2.
Method of regional smelt has been adopted in the electronic industrial production.
在电子工业生产中采用区域熔炼的方法，能将金属的纯度提高到99。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条