说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 无磁材料
1)  non-magnetic material
无磁材料
2)  Permanent magnetic materials
永磁材料
1.
The pretreatment technology of nickel electroplating was studied for Nd Fe B permanent magnetic materials, as well as its effect on plating layer by examining the appearance, measuring binding force and porosity, and salt spray corrosion test.
探索了新的除油液配方 ,确定了钕 铁 硼永磁材料电镀镍较完整的前处理工艺 ,其孔隙率为 0 。
2.
The loss of excitation limits the use of Nd-Fe-B permanent magnetic materials in large permanent magnets.
Nd- Fe- B稀土永磁材料的失磁现象制约了其在大型永磁电机中的应用。
3)  soft magnetic material
软磁材料
1.
This paper analyzes and discusses the influence of various process parameters and ingredients on physical and magnetic properties of soft magnetic materials.
本文通过分析制造工艺和成分对软磁材料物理性能的影响,筛选出了一种性能较为优良的软磁材料。
2.
The developing process of nano-crystalline soft magnetic material is reviewed in the beginning of this paper.
本文首先回顾了纳米晶软磁材料的发展过程,介绍了纳米晶软磁材料的组织结构与磁特性,分析了优异磁性能的起源;并介绍了纳米晶软磁合金的应用,最后对纳米晶软磁材料的发展趋势作了展望。
3.
Introduction to the material range of PM soft magnetic materials, the effect of processing parameters on properties, application requirements and some application examples are presented in the article, the emphases are focused on the properties and applications of soft magnetic composites developed in recent years.
本文介绍了粉末冶金软磁材料的种类和工艺参数对其性能的影响、应用技术要求以及一些应用实例。
4)  ferromagnetic materials
铁磁材料
1.
The optical transmission properties of one-dimensional photonic crystals composed of ferromagnetic materials are calculated with transfer matrix methods.
利用光学传输矩阵方法,模拟计算了由铁磁材料组成的一维光子晶体的光学传输特性。
2.
An expression for the relationship between the amplitude of MAE (up) and applied stress, This expression provides a basis for the detection of the residualstress in ferromagnetic materials.
根据应力与磁声发射参量的一些关系和规律,提出了磁声发射幅值受外加应力影响的表达式,为检测铁磁材料残余应力提供了基础依据。
3.
The structure and mechanism for Lamb wave generation by electromagnetic acoustic transducer in ferromagnetic materials were studied.
研究了采用电磁超声探头在铁磁材料中激励兰姆波的换能结构和机理模型,磁致伸缩机制是在弱磁化状态下影响换能效率的主导机制,而Lorentz力和磁性力机制在此情况下的作用相对要小得多。
5)  hard magnetic material
硬磁材料
1.
This paper presents theoretical computations of magnetic force bearings made of new type hard magnetic materials neodymium iron boron.
论述了用新型硬磁材料设计的磁力轴承的吸力理论计算方法,并介绍了所设计的测量磁偏心、横向刚度和磁拉力的装
6)  magnetic materials
磁性材料
1.
The research and developing trend of magnetic materials;
磁性材料的研究和发展趋势
2.
The mechanisms of mechanical alloying and the application in the field of magnetic materials;
机械合金化的原理及在磁性材料研究中的应用
3.
Examples of applying the magnetic materials in material sending organizations;
磁性材料在送料机构中的应用实例
补充资料:半硬磁材料
半硬磁材料
semihard magneticmaterial
    磁性介于软磁和硬磁之间的磁性材料。一般矫顽力为1~20千安/米(kA/m) ,具有较高的磁滞回线方形度和矩形比。绝大多数半硬磁材料都具有良好的塑性,可加工成薄板或细丝使用。半硬磁材料种类很多,一般按材料结构和磁硬化机理分为3 类。①马氏体磁钢 :指碳钢、铬钢、钨钢和钴钢等 。经热处理后可得到马氏体( 碳在a铁中的过饱和固溶体)、残留马氏体和碳化物组织,使晶格发生畸变,从而产生磁硬化。因其矫顽力小,磁性不高,只用作磁滞电机转子和封闭型继电器铁芯等。② a→γ相变型合金:主要有铁钴钒系、铁锰系和铁镍系合金。其高温组织为γ相,急冷到室温后部分或全部转变为 a 相 。淬火状态时易于进行冷加工,伴随冷加工,残留的 γ相几乎都转变成a相,并产生磁各向异性,导致矩形比上升,磁滞回线方形度增大 。当在某一温度回火时,由a相基体中析出 γ相,构成弥散的 a+γ 组织状态,从而获得较高的矫顽力 。多用于制造簧片开关、计算机存储器元件等。③两相分离型合金:有铁钴钼系、铁镍铝系、铁铜系及钴铁系合金。主要靠热处理后产生的两相分离而得到高矫顽力,用于制造磁滞电机的转子和存储元件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条