1) blasting cleavage groove
爆裂劈槽
2) splitting blast
劈裂爆破
1.
In order to find out the correlation between holes parameters,explosive loading parameters,medium strength and blasting-startup parameters,the authors have done a lot of a small scale splitting blast experiments to prove that the method.
炉底残铁的清除是高炉大修工程中的一个重要而又特殊的环节,本文结合某高炉炉底残铁清除的需要,提出了定向劈裂爆破法清除高炉底部残铁的概念,并进行了实验室劈裂爆破实验,研究了钻孔参数、炮孔装药参数、介质强度等物理力学特性参数以及炮孔参数之间的相互关系,并初步确定了残铁劈裂爆破作业技术参数的设计方法;通过残铁劈裂爆破小规模工业试验,对残铁劈裂爆破技术参数设计方法进行了验证;并最终为炉底残铁劈裂爆破工作的具体实施奠定了一种更为先进和可靠的技术基础。
3) smooth wall pipe split blasting
光爆劈裂管
1.
Based on the smooth wall blasting technigue,smooth wall pipe split blasting technique is presented and the possibility, function and advantage of the method is confirmed by experiment,which contributed functional basis for effectivly managing the roof of under ground station and underground road rock of the gold min
在光面爆破的基础上提出了光爆劈裂管爆破法 ,并通过试验证实了此法的可行性、实用性、先进性 ,为黄金矿山井下采场顶板和井巷硐室的围岩管理工作达到更高的目标提供了实用依
4) Blast splitter
爆破劈裂器
5) To make a crackling or popping sound;crackle.
爆裂发出劈啪声或爆裂声;爆裂
6) split
[英][splɪt] [美][splɪt]
劈裂
1.
Based on the characteristics in the strength of coal seam under the action of the ground pressure, the impact coal cutting is achieved in the coal winning technique by using the impact cutting tool to impact, split and cut the coal on the coal wall.
根据采煤工作面煤壁受地压作用后煤体强度降低的特点，利用冲击刀具对煤壁进行冲击劈裂，在回采工艺上实现了冲击式落煤。
2.
To the cracks on the bottom of the slabs,the effect of water is just like the uniform forces assigned on the crack face which lead to the cracks to split.
对于板底裂纹而言,水的作用相当于在裂纹面上施加了促使裂纹扩展的均布劈裂力,运用断裂力学原理揭示了水对裂纹的劈裂作用,同时采用平面有限元从应力角度考察了水压对裂纹的劈裂影响。
3.
Plain high strength concr ete and plain normal strength concrete,fiber high strength concrete and fiber no rmal strength concrete were tested respectively with split test and their capaci ty to resist propagation of.
通过劈裂试验测试了混凝土的抗裂纹扩展能力与卸载后的裂纹闭合能力 ,获得了具有不同扩展宽度的裂纹 ;然后通过对带裂纹试件的水渗透性试验 ,确定了裂纹宽度COD (CrackOpeningDisplacement)对混凝土渗透系数Kf 的影响关系 ;通过研究劈裂试验中获得的纤维对卸载后裂纹闭合能力的提高关系 ,可以推知纤维对渗透系数的影响。
补充资料：爆裂
爆裂
bursting
b0Olie爆裂(b盯sting)管材生产中穿透管壁的突发性纵向开裂，通常出现在空拔管中。因为空拔后管材外表面存在较大的切向拉伸残余应力(见管材冷援变形原理)。管壁厚和气温低时发生空拔爆裂倾向更大。为防止纵裂缺陷，空拔时减径量不能过大，连拔道次要少，拔后应及时烘烤或退火。为防止钢管爆裂也可采用滚模拔制。(见管材冷轧冷拔) (李连诗)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条