1) complex electromechanical system
复杂机电系统
1.
Causes of the chatter of temper mill were researched from the aspect of electromechanical coupling of complex electromechanical system.
从复杂机电系统机电耦合角度探讨了引起平整机带材横振纹的因素 ,研究了电气传动系统电流谐波分量对平整机组的影响 ;此外 ,结合CM0 4平整机组电气传动系统结构和工作状态的特点 ,分析了主回路电流谐波分量作为“干扰”信号 ,经控制回路作用对平整机机械主体运动的影响 。
2.
According to the non-stability of vibration signals in complex electromechanical system,applying modern nonlinear analytical theory and method and combining Hilbert-Huang transform and the power ratio analysis of different frequency bands with wavelet packet decomposition we studied the rub-impact and misalignment fault experiment vibration signals of an electromechanical rotor system.
针对复杂机电系统振动信号呈现复杂非平稳性的特点,采用Hilbert-Huang变换(HHT)和基于小波包分解的频带能量比例非线性分析方法,对机电转子系统碰摩和不对中故障试验信号进行分析。
3.
Thus, the bond graph method for dynamic similarity analysis of complex electromechanical system was proposed.
以适用于多能域系统建模的键合图为工具,论述了复杂机电系统键合图相似的前提条件,推导出了键合图各要素相似所对应的动力学相似条件,在此基础上,根据基于键合图的模态分析理论,进一步进行了系统模态相似研究,给出了系统频率、振型等主要模态参数的相似关系,从而提出了复杂机电系统动力学相似的键合图分析法。
2) complex mechanical system
复杂机械系统
1.
Theoretical research on the optimization method of complex mechanical system based on characteristic variables;
基于特征变量的复杂机械系统优化方法的最优性条件
2.
In view of the shortcomings of the dynamics simulation software for complex mechanical system in terms of low efficiency,incapability of reuse and high threshold for fresh users,comprehensive investigation on subsystem modeling technology of complex mechanical system was performed.
针对目前复杂机械系统动力学仿真软件建模效率偏低、模型无法重用、用户起点高等缺点,对复杂机械系统动力学仿真中的子系统建模技术进行了研究。
3.
Seeing that the running states and feature parameters of complex mechanical systems always are of stronger non-linearity and coupling properties, the feature extraction of the non-linear state parameters is realized by a quantitative evaluation method based on information entropy.
复杂机械系统运行状态和特征参量往往具有较强的非线性和耦合性,运用信息熵定量评价方法实现系统状态参量的非线性特征提取。
3) complex mechanical systems
复杂机械系统
1.
Dynamic Modeling of Complex Mechanical Systems and Its Application in Vehicle Design;
复杂机械系统动力学建模研究及在汽车上的应用
2.
The paper summarizes the features,present situations and applications of optimal design theory for complex mechanical systems.
总结了复杂机械系统优化设计的特点。
4) Complicated mechanical system
复杂机械系统
1.
The study of practical fault diagnosis principle on complicated mechanical system;
复杂机械系统实用故障诊断原则的研究
2.
The CAX/PLM Platform Theory and Application for Complicated Mechanical System;
复杂机械系统CAX/PLM平台理论及其应用
3.
Based on the object-oriented technology, the model elements of a complicated mechanical system were analyzed according to their characteristics, and their class architecture in dynamic modelling platform to support dynamics simulation was presented.
采用面向对象技术对复杂机械系统动力模型元素进行了分析,根据其特点提出了支持动力学仿真建模平台的模型元素类体系结构,并对该平台关键技术——关联关系管理和子系统建模进行了探讨,最后应用上述技术开发出了仿真建模平台InteDyn,并以汽车整车模型和悬架模型为例证明了这些技术的可行性和有效性。
5) Complex Man-machine Systems
复杂人机系统
1.
Analysis of Organization Factors Influencing Complex Man-machine Systems;
影响复杂人机系统安全的组织因素分析
补充资料：复杂调节系统
分子式：
分子量：
CAS号：
性质：由几个调节对象、几个测量元件、几个调节器和一个或几个调节阀构成的多回路调节系统。有串级调节系统、比值调节系统、均匀调节系统和多冲量调节系统等。
分子量：
CAS号：
性质：由几个调节对象、几个测量元件、几个调节器和一个或几个调节阀构成的多回路调节系统。有串级调节系统、比值调节系统、均匀调节系统和多冲量调节系统等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条