1) aluminium lead calcium tesnary alloy
铅-钙-铝三元合金
2) Pb-Ca-Sn-Al alloy
铅钙锡铝合金
1.
The deep cycle life of battery made from Pb-Ca-Sn-Al alloy was increased and reached 435 cycles after improvement.
经过改进,提高了铅钙锡铝合金电池的深循环寿命,循环寿命达到了435次。
2.
According to the alloy for positive grid,VRLA batteries for EBs can be classified to Cd-containing products with Pb-Sb-Cd alloys and Cd-free products with Pb-Ca-Sn-Al alloys.
按正极板栅采用的合金材料不同,电动自行车用阀控铅蓄电池可分为用铅锑镉合金的"含镉产品"和用铅钙锡铝合金的"无镉产品"。
3) lead-calcium alloy with polybasic compostion
铅钙多元合金
4) Pb-Ca alloy
铅钙合金
1.
Influence of the content of Sn-Ca on the corrosion resistance in Pb-Ca alloy;
钙锡含量对铅钙合金耐腐蚀性能的影响
2.
Pb-Ca alloy normal substances used for direct-reading spectrometer;
铅蓄电池用铅钙合金直读光谱标准物质的研制
3.
The features, production process and problems related to the production of Pb-Ca alloy were described.
介绍了铅钙合金的特性、生产工艺和需要解决的几个问题;确定了用掺熔配法生产铅钙中间合金,该法操作简单、能耗和污染少、成本低,易投入工业化生产。
5) Pb Ca alloy
铅钙合金
1.
The interference of lead on the determination of Sb and Cu by AAS was studied, and a new method for determination of Sb and Cu in Pb Ca alloy was established.
研究了铅对原子吸收光谱法测定锑及铜的干扰及其消除方法，提出了测定铅钙合金中锑、铜的新方法。
2.
A comparison has been made between Pb low Sb and Pb Ca alloy grids regarding to their water loss and cranking ability at low temperature.
对低锑合金板栅和铅钙合金板栅电池的失水情况进行了对比研究 ,并对比了两种合金电池的低温起动性能 ,决定采用铅钙合金作为板栅材料制造富液式密封起动用蓄电池 ,并对生产过程监控交流一些经
6) Lead-Calcium alloy
铅钙合金
1.
A lead-calcium alloy with barium for battery grids;
一种含钡的铅钙合金板栅材料的研制
2.
Based on the experience and data from manufacturing lead-calcium alloy and lead-antimony alloy for several years,this paper firstly presented the idea and theoretical model of "relatively fluctuating range " for controlling the composition oflead-based alloy.
在多年生产铅锑合金与铅钙合金的基础上,首次提出了配制铅基合金“相对波动范围”的相关概念及理论模型,探讨了铅基合金相对波动范围值与成分的关系,为提高配制铅锑合金与铅钙合金的一次合格率指明了有效途径。
补充资料：氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条