1)  high solid concentration
高固含率
1.
Taking two systems of airwatercatalyst and airparaffin oilcatalyst with high solid concentration, the hydrodynamics of the threephase slurry reactor including average gas holdup, bed pressuredrop, and critical gas velocity for complete suspension of solid particles, has been studied.
在空气 -水 -甲醇合成催化剂、空气 -液体石蜡油 -甲醇合成催化剂两种系统中 ,研究了高固含率下 ,三相淤浆床反应器的平均气含率、床层压降、临界气速等流体力学性质 ;考察了各种因素的影响 ,并得到了气含率的经验关联式。
2)  high solid
高固体
1.
Variations of the ammonia concentration of high solid anaerobic digestion technology for organic waste.;
厨余垃圾高固体厌氧消化处理中氨氮浓度变化及其影响
2.
Under mesophilic condition(35 ℃),a bench-scale experiment based on high solid anaerobic digestion process was conducted in a fed-batch single phase reactor to treat the OFMSW.
在中温(35~37℃)条件下,对连续式单级高固体厌氧消化反应器处理易腐有机垃圾进行了试验研究,连续试验时间达半年以上。
3.
Under mesophilic condition (35 ℃), a bench-scale experiment based on high solid anaerobic digestion process was conducted in a fed-batch single phase reactor.
在中温(35℃)条件下,应用连续式单级高固体厌氧消化技术对有机垃圾进行了实验室规模的处理研究。
3)  high solid content
高固含量
1.
Influence factors on preparation of aqueous polyurethane emulsion with high solid content;
制备高固含量水性聚氨酯乳液的影响因素
2.
Synthesis of waterborne polyurethane adhesive for shoes with high solid content;
高固含量鞋用水性聚氨酯胶粘剂的合成
3.
Random-design for the technology of emulsion polymerization with high solid content and the SAS analysis for the resultant data;
高固含量乳液制备工艺的优化及实验结果的SAS分析
4)  high-solids
高固体份
1.
The Automotive Finishes was composed of Cardura E 10-based acrylic resin with high-solids and excellent weather resistance as main resin, and Cardura E10-based polyester resin with high-solids as additional resin to be used to improve decorative properties, such as chubbiness, gloss, PGD,and so on, of the only acrylic amido automotive finishes.
该面漆以叔碳酸缩水甘油酯(商品名E10)改性高固体份丙烯酸树脂作为主体树脂,该树脂是具有高耐候性的丙烯酸树脂,以叔碳酸缩水甘油酯改性高固体份聚酯树脂作为添加树脂,弥补单纯丙烯酸氨基漆在丰满度、光泽、鲜映性(PGD)等外观装饰性等方面的不足,从而形成高耐候性、高装饰性的高品质、高固体份汽车面漆。
5)  high solid
高固体分
1.
Hydroxyl acrylic acid resin(HAR) with high solid and low viscosity was polymerized from an appropriate acrylic acid monomer in solution.
采用溶液聚合法合成了高固体分低粘度的羟基丙烯酸树脂(HAR),详细讨论了引发剂、链转移剂、反应温度、溶剂等对HAR粘度的影响。
2.
The title high solid acrylic resin is prepared by using solution polymerization process.
采用溶液聚合法合成高固体分丙烯酸树脂,用凝胶渗透色谱(GPC)法分析引发剂的种类和用量、反应温度及聚合工艺对丙烯酸树脂的相对分子质量及其分布的影响。
3.
A series of novel high solid silicone modified hydroxyl acrylic resins for automotive coatings were synthesized using different amount of organosilane coupling agent KH 570 as modifier.
用不同含量的硅烷偶联剂 KH570作为改性剂,合成一系列新型汽车涂料用有机硅改性高固体分羟基丙烯酸树脂,通过水接触角,粘度,铅笔硬度,附着力,耐冲击性等的测试,研究了制备工艺,硅烷偶联剂的含量对树脂性能的影响。
6)  high solid content
高固含
1.
Preparation of acrylamide copolymer inverse microemulsion with high solid content and its flocculating performance;
高固含丙烯酰胺共聚物反相微乳液的合成及絮凝性能
2.
Analysis of particle size in emulsion-based pressure sensitive adhesive with high solid content;
高固含乳液压敏胶的粒径分析
3.
A description of this process with very high solid content, up to 1,000 grams hydrate per liter of slurry, is applied, particularly with the addition of a chemical in precipitator.
法铝法的特点是采用高固含 (可达 10 0 0 g/ L) ,并向分解槽中适当加入添加剂。
参考词条
补充资料：固色率
分子式：
CAS号：

性质：活性染料与纤维发生化学结合的定量表示方式。其计算基准有二：(1)以染色时所用的染料总量为基准，固色率表示在纤维上结合的染料量与所用染料总量之比；(2)以固色前织物上的染料量为基准，表示固色后单位质量织物上的染料结合量与固色前单位质量织物上染料量之比。后一种计算法可用于分散染料对聚酯纤维的染色。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。