1) high adhesion force
高结合力
1.
The tin-base plating technology on aluminum and aluminum alloy was recommended for its high anti-tarnish, high adhesion force and high solderability.
重点对比了用浸锌、浸镍和磷酸阳极氧化两种铝及铝合金电镀前处理方法得到的锡基镀层的孔隙率、结合力、抗高温高湿性能、抗中性盐雾试验性能 ,分析了铝及铝合金锡基镀层在长期贮存过程中易变色、生霉、泛黑的原因 ,推荐了一种在铝及铝合金上电镀高抗变色性、高结合力、高可焊性的锡基镀层工艺。
2) high-adhesion-stress
高粘结力
1.
This paper introduces the technical characteristics,technological property and application of the high-adhesion-stress and high-water-resistance type insulation impregnating varnish.
分析了高粘结力耐水性绝缘浸渍树脂的技术特性、工艺性能,介绍了其应用情况,该树脂具有粘结力高、耐水性好、贮存稳定性好等特点,分析结果表明,该树脂是较为理想的耐水性绝缘浸渍树脂,可广泛应用于潜水、湿热、矿井等有特殊要求的电机绕组、电器线圈的浸渍绝缘处理。
3) combination of higher and elementary mathematics
高初结合
1.
Strengthening combination of higher and elementary mathematics and improving ability of solving elementary mathematical problems;
加强高初结合,提高数学解题能力
2.
At present,the useful of the combination of higher and elementary mathematics is recognized.
在目前的数学教学中,高初结合越来越受到重视。
4) adherence
[英][əd'hɪərəns] [美][əd'hɪrəns]
结合力
1.
The resultant deposit had advantages such as bright, smooth, good adherence and eliminated cross corrosion.
本文研究了铝上电镀工艺，在传统浸锌法的基础上，提出一次浸锌－ 浸铁镍法和二次浸锌－ 交流方波预镀暗镍法，所得镀层结合力好、平整光滑，避免了横向腐蚀，经过试验，提出了适合铝轮毂（ 硅铝合金） 电镀的工艺方法。
2.
The rough surface offered more binding points,which could enhance the adherence between the coating and AZ91D Mg alloys,but the binding force was much more influenced by the compaction of the coating.
结果表明,AZ91D镁合金表面活化后,虽然粗糙界面由于更多的结合点和更大的机械互锁作用,能提高镀层与基体间的结合力,但是镀层结合的致密程度对结合力的影响作用更为显著。
3.
The film quality and particularity of Large area glass such as pin-holes adherence quality resisting abrasion uniformity, stability of chemistry optic quality quality of heating quality of electrics and so on, are analyzed and discussed in detail as soon as possible, which relate to coating equipment desposit technics coating material structure of films and many aspects of natural science.
在对玻璃、玻璃深加工、深加工的主要物理方法以及磁控溅射沉积方法作了简单介绍后，对玻璃镀膜膜层的主要品质和特性：针孔、结合力、耐磨性、均匀性、化学稳定性、光学性质、热学性质和电学性质展开了尽可能全面细致的分析和讨论。
5) cohesion
[英][kəʊ'hi:ʒn] [美][ko'hiʒən]
结合力
1.
Effects of annealing temperature on microstructure and cohesion of ZrW_2O_8 thin films;
退火温度对ZrW_2O_8薄膜结构和结合力的影响
2.
The plating rate and cohesion of different structure coatings were measured.
用X射线衍射分析了镀层结构;用SEM观察了各种结构镀层的表面形貌;测定了各种结构镀层的镀速和结合力;利用线性极化和阳极极化曲线分析了各种结构镀层的耐蚀性能。
3.
With optical microscope, friction and wear spectrometer and scratch spectrometer, the influence of the parameters of sputtering time, sputtering power and interface layer on the film was studied The results showed that the friction factor of BN film was about half of that of the steel based materials, and the cohesion between film and substrate could obviously be.
结果表明:氮化硼薄膜的摩擦因数约为钢基材料的一半,中间层镍磷合金的加入使薄膜结合力显著提高。
6) adhesion strength
结合力
1.
Causes for poor adhesion strength of electroplated coating to ABS plastic and their controls
ABS塑料与电镀层结合力差的原因分析及其控制
2.
The effects of depositing temperature on the thickness, adhesion strength and hardness of TiN film have been studied in this paper.
研究了沉积温度对膜层的厚度、结合力及硬度的影响。
3.
Cyanide-free pre-immersion can improve covering power and throwing power as well as the adhesion strength of coating.
无氰预浸可提高镀液深镀能力与分散能力,及镀层结合力。
补充资料：镀层结合力
分子式：
CAS号：
性质：电镀层与基体表面的结合强度。评定的方法有摩擦抛光试验、剥离试验、锉刀试验、凿子试验、划线划格试验、弯曲试验、缠绕试验、拉力试验、阴极试验、喷丸试验等。定量测定的方法比较复杂，故常采用定性评定方法。
CAS号：
性质：电镀层与基体表面的结合强度。评定的方法有摩擦抛光试验、剥离试验、锉刀试验、凿子试验、划线划格试验、弯曲试验、缠绕试验、拉力试验、阴极试验、喷丸试验等。定量测定的方法比较复杂，故常采用定性评定方法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条