1) collimated abrasive water jet
准直管磨料射流
1.
For increasing the tunneling speed and improving the cutting quality on hard rock, a new type tunneling system,a hard rock cutting of collimated abrasive water jet, is put forward and its characteristics of configuration and operating principle are discussed.
为了提高坚硬岩石巷道的掘进速度和质量，提出了将准直管磨料射流用于岩石巷道掘进的新型方案，并讨论了其组成和工作特点，分析了准直管磨料射流装备的结构和工作原理。
2) abrasive jet
磨料射流
1.
The cause analyses and model study of striation on cut surface generated by abrasive jet;
磨料射流切割表面波纹的成因分析及其建模研究
2.
Experimental research on application of abrasive jet slotting technology toimprove flow field nearby wellbore formation;
应用磨料射流割缝技术改善近井地层流场的实验研究
3.
Mechanism study of cutting metal casing by abrasive jet;
磨料射流切割金属套管机理研究
3) abrasive water jet
磨料射流
1.
Application and Research of Removal of Inner Hole Burrs With Abrasive Water Jet Technology;
磨料射流技术去内孔毛刺的应用研究
2.
Two phase flow property of the pre-mixed abrasive water jet;
前混合磨料射流系统液固两相流动特点
3.
Numerical simulation of the nozzle inside-flow of collimated pipe abrasive water jet;
准直管磨料射流喷头内流的数值模拟
4) abrasive waterjet
磨料射流
1.
Effect of Abrasive Waterjet Parameters on the Removal Volume;
磨料射流加工的主要参数对冲蚀体积的影响
2.
Advances in the velocity and structure measurements of abrasive waterjet were reviewed.
对磨料射流两相速度测量和射流结构测量两方面的进展进行了综述。
3.
By briefly summarizing the development and application of unsubmerged abrasive waterjet (AWJ) as well as the theory of artificial submerged condition, a new tentative approach to apply AWJ into underwater environment was proposed because of its great potential advantages.
本文简要回顾了非淹没磨料射流技术与人工淹没环境条件理论的发展与应用,认为将磨料射流引入水下加工领域是一种新的尝试,通过介绍国内外的一些相关研究,充分显示了淹没磨料射流的潜在优势,在此基础上,提出一套淹没磨料射流的模拟装置,实现了在实验室进行模拟大水深环境的淹没磨料射流性能试验。
5) abrasive water jet
磨料水射流
1.
The application of an abrasive water jet in cutting marble;
磨料水射流在大理石切割中的应用
2.
Analysis of forces acting on abrasive particles in abrasive water jet;
磨料水射流中磨料颗粒的受力分析
3.
Discussion on abrasive water jet cutting in dangerous environment of coal mine;
煤矿井下危险环境磨料水射流切割技术探讨
6) abrasive waterjet
磨料水射流
1.
Experimental Research on Cutting Quality Generated by Ultra High Pressure Abrasive Waterjet;
超高压磨料水射流切割质量的实验研究
2.
Modeling and experiment on cutting characteristics in abrasive waterjet machining with cutting head deflexion
磨料水射流偏摆切割模型及试验
补充资料：准直管
分子式：
CAS号：
性质：光谱仪器光学系统中用来准直光束的部件。一种是圆筒形物件，光源的光束通过圆筒后，可使光源的光束成为平行光束，然后再投射到单色器上。此外，凡能使单色器射出的光成为平行光束的透镜或反射镜，也称其为准直部件。
CAS号：
性质：光谱仪器光学系统中用来准直光束的部件。一种是圆筒形物件，光源的光束通过圆筒后，可使光源的光束成为平行光束，然后再投射到单色器上。此外，凡能使单色器射出的光成为平行光束的透镜或反射镜，也称其为准直部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条