1) super-austenitic stainless alloy
高级奥氏体不锈合金
2) super austenitic stainless steel
超级奥氏体不锈钢
1.
The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
2.
The liquids of N08904 super austenitic stainless steel was computed and tested by means of theoretical calculation and thermal analysis,reasonable overheat was put forward and leaking problem of molten steel during continuous casting was solved and continuous casting production had come into effect.
采用理论计算与热分析相结合的方式对N08904超级奥氏体不锈钢的液相线温度进行了计算测试,提出了合理的过热度参数,解决了连铸易漏钢问题,实现了连铸生产。
3.
The results showed that Cr20Ni18Mo6MnVSi super austenitic stainless steel in the chloride solution had excellent corrosion resistance properties after solution treatment at 1100℃ for 2h and followed by the aging treatment at 520℃ for 4h.
1型超级奥氏体不锈钢经1100℃固溶2h+520℃时效4h处理后,在高浓度氯离子溶液中的耐腐蚀性能优异。
3) high nitrogen nickel-free stainless steel
高氮无镍奥氏体不锈钢
1.
A kind of high nitrogen nickel-free stainless steel Cr17Mn11Mo3N which contained 0.
采用金属粉末注射成型工艺制备了Cr17Mn11Mo3N高氮无镍奥氏体不锈钢(含氮0。
4) high nitrogen austenitic stainless steel
高氮奥氏体不锈钢
1.
Nitride precipitation kinetics in high nitrogen austenitic stainless steel and its effect on weldability;
高氮奥氏体不锈钢的氮化物析出及其对焊接性影响
2.
Analysis on fatigue fracture of high nitrogen austenitic stainless steel at room temperature
高氮奥氏体不锈钢室温疲劳断口分析
3.
Physicochemical phase analysis of high nitrogen austenitic stainless steels after solution treatment and aging
固溶时效后高氮奥氏体不锈钢的物理化学相分析
5) high-nitrogen austenitic stainless steel
高氮奥氏体不锈钢
1.
Microstructure evolution and mechanical hardening of 18-18-0.5N high-nitrogen austenitic stainless steel during cold rolling;
18-18-0.5N高氮奥氏体不锈钢冷轧变形过程中的组织演变和形变强化
6) high nitrogen austenite stainless steel
高氮奥氏体不锈钢
1.
Microstructure and mechanical properties of MIG welded joint of high nitrogen austenite stainless steel;
高氮奥氏体不锈钢MIG焊接头的组织和性能
2.
High nitrogen austenite stainless steel has high toughness and high strength.
高氮奥氏体不锈钢具有良好的强韧性,且可避免不锈钢中镍离子引起的生物过敏反应,在医疗器械方面具有广泛应用前景。
补充资料：奥氏体-贝氏体球铁
分子式：
CAS号：
性质：又叫奥-贝球铁。基体组织为奥氏体加贝氏体组织的球墨铸铁。这类球铁硅含量一般在1.4%～3.8%。含锰量小于0.5%，与普通球铁比较硅偏高、锰偏低。通过调节化学成分与热处理获得理想的奥-贝球铁的基体组织为针状贝氏体或无碳贝氏体一富碳奥氏体。这类球铁具有优良的综合机械性能、强度高、耐磨性好、韧性好、特别是有高的缺口韧性，可代替钢，用于制作重要受力结构件，如曲轴、齿轮、凸轮轴等。
CAS号：
性质：又叫奥-贝球铁。基体组织为奥氏体加贝氏体组织的球墨铸铁。这类球铁硅含量一般在1.4%～3.8%。含锰量小于0.5%，与普通球铁比较硅偏高、锰偏低。通过调节化学成分与热处理获得理想的奥-贝球铁的基体组织为针状贝氏体或无碳贝氏体一富碳奥氏体。这类球铁具有优良的综合机械性能、强度高、耐磨性好、韧性好、特别是有高的缺口韧性，可代替钢，用于制作重要受力结构件，如曲轴、齿轮、凸轮轴等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条