1) split-flow rolling
分流轧制
1.
Discussion on and practice of split-flow rolling technology for hot-rolled ribbed bar;
热轧带肋钢筋分流轧制技术研究与实践
2) rheorolling
流变轧制
1.
Microstructural characteristics of electromagnetically stirred semi-solid 60Si2Mn steel after rheorolling;
电磁搅拌的半固态60Si2 Mn钢流变轧制的组织特征
2.
High carbon tool steels processed by conventional processing methods and semi-solid rheorolling technology are discussed.
探讨了高碳工具钢常规的加工方法和半固态流变轧制技术,结果表明将在凝固过程中进行搅拌后制备的高碳工具钢半固态浆料直接进行流变轧制,可生产出成分均匀、没有偏析的产品,消除了在常规轧制中很难克服的网状碳化物等缺陷;半固态固相颗粒细小而且星球状可生产出高强、高韧性的工具钢。
3) slit rolling
切分轧制
1.
Finite element simulation of there-dimensional deformationin slit rolling bar;
棒材切分轧制过程中三维弹塑性有限元模拟
2.
Finite element simulation of metal deformation in fluted -square pass during slit rolling of deformed bars;
螺纹钢切分轧制弧边方孔中轧件变形有限元分析
3.
Finite element simulation of slit rolling of rebar;
螺纹钢切分轧制有限元分析
4) splitting rolling
切分轧制
1.
Solution measures to the problem of irregular in head of piece of the two-strand splitting rolling line;
两线切分轧制钢筋头部不齐问题的解决
2.
Prime discussion on the splitting rolling of semi-continuous bar rolling line of Qingdao Iron and steel Co.,;
青钢半连轧棒材生产线切分轧制工艺初探
3.
Discussion on application of splitting rolling technology on horizontal continuous mill;
水平连轧机组应用切分轧制技术的探讨
5) slitting rolling
切分轧制
1.
Pass and guide unit design of two-strands slitting rolling for Φ16mm ribbed bar;
Φ16mm带肋钢筋二线切分轧制孔型与导卫设计
2.
The application and improvement of three-strands slitting rolling technology;
棒材3线切分轧制技术的应用与改进
3.
In view of the shortcomings of usual roll used in bar slitting rolling,the tungsten carbide roll and alloyed steel roll were applied.
针对在棒材切分轧制中使用普通轧辊存在的问题,采用了碳化钨辊和合金辊,并取得了较好的经济效益。
6) Split rolling
切分轧制
1.
The design of pass system and guide units were introduced in detail,which were used in the four-strand split rolling technology to produce Φ12mm bar.
介绍了水城钢铁公司二轧厂棒材4线切分轧制工艺的开发情况;重点介绍了Φ12mm带肋钢筋孔型系统的选择、导卫系统和活套等的设计及4线切分轧制中的调整操作要点。
2.
This paper describes not only the technological features and use of split rolling,but also various methods and the application range of split rolling In addition,the paper introduces in detail the development process of split rolling technology and application of new split rolling technologies in China and abroa
说明了切分轧制的技术特点、意义以及切分轧制的各种方法及其适用范围 ,综述了切分轧制技术的发展历史及国内外开发和推广应用切分轧制新技术的情
3.
And analyzes the feasibility that plant employs split rolling,then determines the pass system of split rolling and guide unit,the paper introduces in detail the development process of split rolling technology in the plant.
介绍了长钢连轧厂工艺设备情况及采用切分轧制的可行性,进而确定了切分轧制的孔型系统和导工装置,通过试轧后开发出一套符合该厂实际的切分工艺。
补充资料：板带轧制速度规程(见板带轧制规程设计)
板带轧制速度规程(见板带轧制规程设计)
speed schedule for plate and strip rolling
bandai zhazhi sudu guieheng板带轧制速度规程(speed seheduxe fo:plateand strip rolling)见板带札制规程设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条