1) the oversize material discharged from the classifier
选粉机粗粉
1.
The grinding properties of grinding the oversize material discharged from the classifier in a cement plant and those of the blastfurnace slag as raw material were investigated by using the vibrating mill.
研究了利用振动磨粉磨水泥厂选粉机粗粉和矿渣的粉磨特性 ,试验结果得出了用振动磨粉磨选粉机粗粉和矿渣的细度下限、粉磨选粉机粗粉和矿渣至水泥产品细度的单位容积产量及新增 -80 μm单位容积产量 。
3) separator
[英]['sepəreɪtə(r)] [美]['sɛpə'retɚ]
选粉机
1.
Structure and performance of SLK separator;
SLK选粉机结构特点及性能研究
2.
Study of Flow field and performance on O-SEPA separator;
O-SEPA选粉机流场分析及其对性能的影响
3.
To improve the system output, Lubi Company connected their two slag grinding systems in series, one was a closed circuit system composed by a 3 m×11 m ball mill with combined DST separator and the other was an open circuit system composed by a 2.
为了提高系统产能,鲁碧公司对其两条矿渣粉磨生产线(φ3m×11m球磨机带DST组合式选粉机组成的闭路粉磨与φ2。
4) Powder selecting mechanism
选粉机械
5) air classifier
选粉机
1.
SStudy on classifying housing of SLK air classifier based on air-solid two-phase numerical simulation
基于气-固两相数值模拟的SLK选粉机分级室研究
6) coarser powder
粗粉
1.
The injection molding for Fe-Ni-Cu-C mixed coarser powder with particle size of 60!m was made, the solvent-thermal degreasing process was studied.
对平均粒度为60!m的Fe-Ni-Cu-C合金粗粉进行了注射成形,重点研究了溶剂-热二步脱脂工艺。
2.
Fe-Ni-Cu-C mixed powder by injection molding using coarser powder with particle size of 60um was studied.
对平均粒度为60μm的Fe-Ni-Cu-C合金粗粉进行了注射成形。
3.
The thermal debinding was proceeded in the injection molding by using the Fe-Ni-Cu-C alloy coarser powder with the particle size of 60 μm.
对平均粒度为60μm的Fe-Ni-Cu-C合金粗粉注射成形坯进行了热脱脂,用差热分析仪测定了粘结剂各组元的DTA和TGA曲线,制定了合理有效的热脱脂工艺。
补充资料：筛粉机
粮食加工机械的一种。用不同规格的筛网使经磨粉机研磨的物料分级并从中提取面粉的机械，有平筛和圆筛两种。最常用的平筛机（见图）,筛体用4组藤条、玻璃纤维条或钢丝绳水平悬吊起来,并由电动机驱动带偏重块的传动装置，驱动筛体作平面回转运动。筛体中封装有2、4、6或8幢方筛，每幢有16～24层筛格，可以使用半幢、 1幢或几幢筛格处理一种物料。每层筛格的下面放置橡皮球、帆布块或塑料块，用以清理筛面。圆筛机是由 1种或几种筛网张紧制成的低速旋转的圆筒筛，筒内有1个高速旋转的打板叶轮,将进入筒内的物料强烈地掷向筛筒内壁，强制筛出面粉。适用于筛理粘性较大的物料。筛粉机常用的筛面材料有钢丝筛布和合成纤维与蚕丝混纺的筛绢。前者用于分离较粗的物料；后者用于分离较细的物料。筛布和筛绢按筛孔大小都有不同的规格，供不同情况下选用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条