1) foam compound system
泡沫复合体系
1.
The foaming behavior of the foam compound system and the stability of the foam are evaluated by static experiments.
通过对泡沫复合体系发泡特性的静态实验研究,评价了泡沫复合体系发泡特性及泡沫稳定性。
3) foam polymerization
泡沫体系聚合
4) foam system
泡沫体系
1.
Experimental study of factors affecting the sealing characteristics of foam system;
泡沫体系封堵性能影响因素实验研究
2.
Based on the choice of PAS or CTAB as foam agent, NAPS as stable agent, the prescription of NACP foam system for displacing oil was studied, and oil displacement effect of this system was appraised through core floating experiments.
在已优选PAS或CTAB作为起泡剂,NAPS作为稳泡剂的基础上,对驱油用NACP泡沫体系的配方进行了研究,并通过岩心流动实验评价了该体系的驱油效果。
3.
Advances in dispersion polymerization in foam system were reviewed.
综述了近年来泡沫体系分散聚合发展的情况,并着重介绍了适合于泡沫体系分散聚合的各种条件(如单体、引发剂、交联剂、起泡剂、泡沫稳定剂、设备等)及这些条件对聚合过程和产物性能的影响;泡沫体系分散聚合在制备多孔、超多孔吸水凝胶方面是极为有效的聚合方法,同时,在水溶性聚合物制备方面也有极为广阔的应用前景。
5) foam composite flooding
泡沫复合驱
1.
The oil-displacing mechanisms of foam composite flooding at the high temperature and high salt in Zhongyuan Oilfield were investigated by microscopic model experiment and sand pack experiment.
泡沫复合驱油过程中形成三个驱油带:前沿是乳状液渗流;中间既有前沿中的乳状液渗流,也有气体锥进渗流和泡沫渗流;后沿以泡沫渗流为主。
6) polymer-surfactant foam combination flooding
泡沫复合驱
1.
An experimental study about polymer-surfactant foam combination flooding was done in the reservoir conditions of the central part of Block 2 in central Gudao Oilfield and the western Chengdong Oilfield.
针对胜利油区孤岛油田中二区中部Ng3+4油层和埕东油田西区油藏条件,进行了泡沫复合驱实验研究。
补充资料：复合泡沫
分子式：
CAS号：
性质：又称复合泡沫。相对密度>0.32的环氧树脂泡沫塑料。相对密度0.627的环氧泡沫塑料单轴压缩强度29.39MPa，拉伸强度31.72MPa，弯曲强度41.37MPa，剪切强度30.34MPa，体积电阻率8.7×1014Ω·cm，介电强度15.7～19.70MV/m。将环氧树脂与添加剂、玻璃或陶瓷或塑料(包括纤维材料)中空微球固化成型制得。多用于电子和宇航工业，且常用于水下装置部件、漂浮件；电子工业用封装料、绝缘件；模具填料，受热结构件夹芯料等受热部件。
CAS号：
性质：又称复合泡沫。相对密度>0.32的环氧树脂泡沫塑料。相对密度0.627的环氧泡沫塑料单轴压缩强度29.39MPa，拉伸强度31.72MPa，弯曲强度41.37MPa，剪切强度30.34MPa，体积电阻率8.7×1014Ω·cm，介电强度15.7～19.70MV/m。将环氧树脂与添加剂、玻璃或陶瓷或塑料(包括纤维材料)中空微球固化成型制得。多用于电子和宇航工业，且常用于水下装置部件、漂浮件；电子工业用封装料、绝缘件；模具填料，受热结构件夹芯料等受热部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条