1) ANSYS software
ANSYS分析软件
2) ANSYS software analysis
ANSYS软件分析
3) ANSYS software
ANSYS软件
1.
Simulation and analysis of acoustics transducers using the ANSYS software;
ANSYS软件在模拟分析声学换能器中的应用
2.
Application of the modeling and meshing technology based on ANSYS software;
基于ANSYS软件建模及划分网格技术的应用
3.
The application of ANSYS software to the bearing capacity analysis of unbonded prestressed concrete box girder;
ANSYS软件在无粘结预应力混凝土箱型梁承载力分析中的应用
4) ANSYS
ANSYS软件
1.
Study on Application of ANSYS Software in Stability Analysis of Tailing Dam;
ANSYS软件在尾矿坝稳定性分析中的应用研究
2.
Thinking about application of ANSYS in some geotechnical project problems;
用ANSYS软件分析不同岩土工程问题的若干思考
3.
The Application of ANSYS to Filled Conduit Analysis;
应用ANSYS软件分析地下埋管工程
5) software ANSYS
ANSYS软件
1.
Application of software ANSYS to solving Biot consolidation equation;
ANSYS软件在Biot固结方程求解中的应用
2.
A jacket type offshore platform CII located in Bohai Bay was modeled as a steel frame structure and the FEM software ANSYS was applied to study dynamic characteristics of the structure.
将位于渤海湾的CII导管架海洋平台看作空间钢架结构,应用ANSYS软件对导管架平台进行动力学分析,得到平台的基本动力学参数;考虑随机波浪作用,应用蒙特卡罗模拟法和有限元方法对结构进行可靠性分析。
6) ANSYS soft
ANSYS软件
1.
This paper simulates the process of the bendig of the larger and thin-walled shells by means of Computer Simulate of ANSYS Program,represents the application future of ANSYS soft through an example.
这篇文章借助于计算机软件模拟方法,采用ANSYS程序,对薄壁大直径筒体卷制过程进行模拟,通过生产实际应用,展示了ANSYS软件应用的广阔前景。
2.
Three-dimensional flow field of non-intermeshing stagger twin screw is analyzed by ANSYS soft, and the distributions of velocity field and pressure field are given.
利用ANSYS软件包对非啮合错列型双螺杆螺纹元件进行了三维等温非牛顿流场分析 ,分析速度场和压力场的分布情况 ,讨论了不同边界条件对整个流道的速度场、压力场及流量的影响 ,所得结论对生产实践具有一定的指导意
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条