1) rosin acrylic aci d epoxy resin
丙烯海松酸环氧酯
2) epoxy acrylate resin
环氧丙烯酸酯
1.
Preparation and characterization of waterborne modified-epoxy acrylate resin;
水性环氧丙烯酸酯的制备与表征
2.
Preparation of polyurethane modified epoxy acrylate resin grouting material;
聚氨酯改性环氧丙烯酸酯灌浆材料的制备
3.
A flexible epoxy acrylate resin prepolymer was prepared.
通过对环氧树脂进行改性,增加其韧性,再用丙烯酸酯化,制得柔性环氧丙烯酸酯预聚体。
3) epoxy monoacrylate
环氧丙烯酸单酯
1.
A dual-curing epoxy monoacrylate resin was synthesized,which contain both epoxide groups and unsaturated double bonds.
合成了既有环氧基团又含不饱和双键的环氧丙烯酸单酯树脂。
4) Epoxy acrylate
环氧丙烯酸酯
1.
Study on synthesis and UV coating film properties of epoxy acrylate modified with maleic anhydride and polyethylene glycol monoester;
马来酸聚乙二醇单酯对环氧丙烯酸酯的改性及其紫外光固化膜性能的研究
2.
Properties of epoxy acrylate synthesized from epoxy resin by modification and esterification;
有机二元酸改性环氧丙烯酸酯及其光固化膜性能的研究
3.
Using FTIR to monitor UV-curing process of epoxy acrylate adhesive;
用FTIR跟踪监测环氧丙烯酸酯胶粘剂光固化过程的研究
5) epoxy-acrylate
环氧-丙烯酸酯
1.
Synthesis and study of low-VOC water-borne epoxy-acrylate hybrid latex;
低VOC水性环氧-丙烯酸酯杂化乳液的合成与研究
2.
A hybrid emulsion polymerization technique was used to synthesize water-based epoxy-acrylate hybrid emulsion.
利用杂化乳液聚合技术合成了水性环氧-丙烯酸酯杂化乳液,考察了乳化剂种类和用量对乳液单体转化率、凝聚率和电解质稳定性的影响,通过FT-IR、GPC、UV对所得乳液进行了分析与表征。
3.
A reactive anionic polyurethane-Acrylate has been prepared, which is then used as emulsifier to prepare the UV curable waterborne epoxy-acrylate/polyurethane-acrylate coatings.
制备了可反应性的阴离子型聚氨酯-丙烯酸酯,并用其作为乳化剂制成了可紫外光固化的水性环氧-丙烯酸酯/聚氨酯-丙烯酸酯复合型水性涂料。
6) vinyl ester
环氧丙烯酸酯
1.
The heat resistant solventless insulating impregnating varnish, which mainly comprises of diallyl isophthalate (DAIP ) and vinyl ester (VE), was synthesized and tested.
合成了以间苯二甲酸二烯丙酯 (DAIP)为主体、环氧丙烯酸酯 (VE)为改性剂的耐高温无溶剂绝缘浸渍漆 ,用 DTA分析了漆液的反应特性 ,讨论了 DAIP的预聚、VE含量等因素对漆液、浇铸体性能的影响 ,并对漆的常规性能进行了测试。
补充资料：环氧酯
分子式：C26H48O4
分子量：424
CAS号：暂无
性质：暂无
制备方法：暂无
用途：用作聚氯乙烯的辅助增塑剂, 并可用作稳定剂
分子量：424
CAS号：暂无
性质：暂无
制备方法：暂无
用途：用作聚氯乙烯的辅助增塑剂, 并可用作稳定剂
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条