1) heat resisting stainless steel
耐热不锈钢（20X23H18）
2) heat resistant
耐热
1.
Synthesis of novel high heat resistant epoxy resin containing naphthyl structure;
一种新型含萘环结构高耐热型环氧树脂的合成
2.
Study on heat resistant epoxy resin adhesive with high peel strength cured at room temperature;
室温固化高剥离耐热环氧树脂胶粘剂
3.
Development of Casting Dual-Phase Heat Resistant Alloy Fe-Cr-Ni-Al;
铸造Fe-Cr-Ni-Al双相耐热合金的研制
3) heat-resistance
耐热
1.
The tray is a typical frame-shaped casting,it should have the abilities of heat-resistance,heat impact-resistance and crack-resistance through using different technologies and improving the technologies,make a simulated analyze on pouring system through CAST soft,investment casting CAE software.
薄壁耐热钢托盘属于典型的筐架结构型铸件,要求其有较高的耐热性、耐热冲击及抗裂能力。
2.
The mechanism of wear-resistance,heat-resistance and corrosionresistance of high chloride cast iron are analyzed respectively.
分析了高铬铸铁具有的抗磨、耐热、耐蚀性机理。
3.
A new duple-phase heat-resistance steel used at above 1 000 ℃ was obtained by adding some Ni to an original ferrite heat-resistance steel.
在高铬铁素体单相耐热钢的基础上,加入一定量的镍,得到一种新的奥氏体-铁素体双相耐热钢,并对该铬镍双相耐热钢的组织特征及常温和高温性能进行了测定。
4) heat-resistant
耐热
1.
Study on preparation and properties of heat-resistant epoxy adhesive cured at room temperature;
室温固化耐热环氧胶粘剂的制备与性能研究
2.
Fire test on a non-heat-resistant fireproof glass with down-flowing water film;
带雨淋水膜的非耐热防火玻璃的火灾试验(英文)
3.
Research present state and development of heat-resistant epoxy adhesive cured at room temperature;
室温固化耐热环氧胶粘剂的研究现状及进展
5) heat resistance
耐热
1.
Influence of three kinds of surface dispersants on the activity and heat resistance of Ru/AC catalyst for ammonia synthesis;
3种表面分散剂对Ru/AC氨合成催化剂的活性和耐热性的影响
2.
Effect of several kinds of antioxidant on heat resistance properties of chlorinated polyethylene;
防老剂对氯化聚乙烯耐热性能的影响
3.
Casting Magnesium Alloy of Mg-Nd-Zn-Zr Series with Heat Resistance and High Strength;
Mg-Nd-Zn-Zr耐热高强铸造镁合金
6) heat tolerance
耐热
1.
Studies on methodlogy for identification of heat tolerance of tomato;
番茄耐热性鉴定方法研究
2.
Studies on Physiological and Molecular Genetics Basis of Heat Tolerance of Two Early Rice Cultivars;
两个早稻品种耐热性生理及分子遗传基础的研究
3.
As one of the environment stress factors, high temperature is often suffered in the protected field at summer, and the heat injure of cucumber, a major vegetable cultivated in protected condition, has become one of the main factors disturbing its normal growth, so how to improve the heat tolerance of cucumber has been one of the important research target in cucumber breeding.
如何提高黄瓜耐热性是目前黄瓜育种研究的重要内容之一。
参考词条
补充资料：polyoxyethylene (20) C16～C18alcohol ether
分子式：R—O—(CH2CH2O)20H(R=C16～C18烷基)
CAS号：
性质： 非离子表面活性剂。20℃时，难溶混浊体，密度(70℃)1.001，折射率(70℃)1.4470，羟价54，闪点274℃，熔点41～44℃，发泡力(0.1％)：初始泡沫量140ml，泡沫破裂2ml/min，可溶于水和苯。由脂肪醇与环氧乙烷经加成反应制得。作为洗液和工业清洗剂的原料。
CAS号：
性质： 非离子表面活性剂。20℃时，难溶混浊体，密度(70℃)1.001，折射率(70℃)1.4470，羟价54，闪点274℃，熔点41～44℃，发泡力(0.1％)：初始泡沫量140ml，泡沫破裂2ml/min，可溶于水和苯。由脂肪醇与环氧乙烷经加成反应制得。作为洗液和工业清洗剂的原料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。