1) ceramic roller kiln
陶瓷辊道窑
1.
The energy saving mechanism with the application of heat radiative coating in ceramic roller kilns is brought to light based on the theoretical analysis on the process of radiative heat transfer.
基于辐射传热原理,本文详细分析了热辐射涂料在陶瓷辊道窑中应用的节能机理,理论分析和实际应用都表明在辊道 窑中应用热辐射涂料后可以有效地增强炉膛中的辐射传热,从而提高辊道窑的热效率,节能效果显著。
2.
The optimization technology of the designed modeling of velocity field and the pollutant emission load in the ceramic roller kiln are researched.
文章研究了陶瓷辊道窑炉建模设计中的温度场和污染物排放的优化技术。
3.
According to the temperature characteristic of the ceramic rolling kiln and the realization scheme of temperature control,intelligent logic control method for temperature process in ceramic roller kiln was advanced.
针对陶瓷辊道窑温度的特性和温度控制的实现方案,提出了陶瓷辊道窑温度控制智能逻辑控制方法。
2) ceramics roll kiln
陶瓷辊道窑
1.
It is very difficult to speculate on the distribution of temperature field in ceramics roll kiln by the limited thermocouples.
利用有限测温点的方法很难推测陶瓷辊道窑内的温度场分布。
2.
Now, ceramics roll kiln was applied widely in architectural keramics, commodity-keramics and sanitation-keramics.
目前,陶瓷辊道窑已广泛用于建筑陶瓷、日用陶瓷、卫生陶瓷工业生产中。
3) the roller of porcelain and ceramics
陶瓷辊道
1.
Aiming at the phenomenon that the roller of porcelain and ceramics is destroyed in the current glass production because of the driving problem,the method of taking the leather belt spreads to move as the main driving is presented in this paper.
针对当前生产中由于传动问题导致陶瓷辊道被破坏的现象,提出皮带传动作为玻璃钢化炉的主传动。
4) ceramic tunnel kiln
陶瓷隧道窑
1.
The necessity and the development of ceramic fast-firing technology were briefly reviewed, temperature distribution at cross sections in fast-firing ceramic tunnel kiln was described, and concrete measures of temperature equilibrium at cross sections in fast-firing ceramic tunnel kiln were offered.
简要说明了陶瓷工业实现快速烧成的必要性及其发展状况,介绍了快烧陶瓷隧道窑各烧成阶段的截面温度分布情况,提出了均衡陶瓷快烧隧道窑截面温度的具体措施。
2.
A VB language program for the calculation of the thermal balance on ceramic tunnel kiln was offered in this paper,the thermal balance calculation mainly including preheates-belt and fired-belt and cooling-belt and total kiln.
编制了陶瓷隧道窑热平衡计算VB程序,主要包括预热带及烧成带、冷却带和全窑热平衡计算。
5) roller hearth kiln for domestic porcelain
日用瓷辊道窑
6) coal-fired ceramic kiln
燃煤陶瓷隧道窑
补充资料：辊道窑
分子式：
CAS号：
性质：又称辊底窑。以转动的辊子作为坯体运载工具的隧道窑。陶瓷坯体可直接置于辊子上或将坯体先放在垫板上，再将热板放在辊子上，由于辊子不断转动，可使坯体依序前进。每根辊子的端部都有小链轮，由链条带动自转，为传动平稳、安全、常将链条分若干组传动。低温处的辊子用耐热合金钢制成，高温处则以耐高温陶瓷材料如刚玉瓷作为辊子。辊道窑一般截面较小，窑内温度均匀，适合快速烧成，但辊子材质和安装技术要求较高。主要用于建筑卫生陶瓷制品的快速烧成。
CAS号：
性质：又称辊底窑。以转动的辊子作为坯体运载工具的隧道窑。陶瓷坯体可直接置于辊子上或将坯体先放在垫板上，再将热板放在辊子上，由于辊子不断转动，可使坯体依序前进。每根辊子的端部都有小链轮，由链条带动自转，为传动平稳、安全、常将链条分若干组传动。低温处的辊子用耐热合金钢制成，高温处则以耐高温陶瓷材料如刚玉瓷作为辊子。辊道窑一般截面较小，窑内温度均匀，适合快速烧成，但辊子材质和安装技术要求较高。主要用于建筑卫生陶瓷制品的快速烧成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条