说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脱附动力学
1)  desorption kinetics
脱附动力学
2)  adsorption-desorption kinetics
吸附-脱附动力学
3)  adsorption dynamics
吸附动力学
1.
Study on adsorption dynamics of cephalosporin C in adsorption resin;
大孔吸附树脂对头孢菌素C的吸附动力学研究
2.
Activated carbon monolith is widely used as adsorbent to enhance the storage capacity of natural gas,which greatly inspires the investigation on adsorption dynamics of methane on this type of adsorbents.
为提高天然气储气装置的单位体积储气量,模压成型的大尺寸吸附剂得到越来越多的应用,有关甲烷在这种吸附剂的吸附动力学问题也成为关注热点。
4)  adsorption kinetics
吸附动力学
1.
The Research on Adsorption Kinetics of Nitrogen and Oxygen;
氧气和氮气的吸附动力学行为测定
2.
Study on the adsorption kinetics of Nitrobenzene on the different adsorption resin;
硝基苯在两种不同吸附树脂上的吸附动力学研究
3.
Study on adsorption kinetics characteristic of a kind of new composite desiccant;
新型复合吸附干燥剂的吸附动力学特性研究
5)  kinetics of adsorption
吸附动力学
1.
In this paper,sludge activated carbon(SAC) was prepared from municipal wastewater treatment plant sludge using chemical activation (the activation reagent was ZnCl2),and the kinetics of adsorption of three dyes(Reactive Brilliant Red K-2BP,Acid Scarlet GR,Direct Violet N) by SAC was studied.
以城市污水处理厂脱水污泥作为原料,采用化学活化法(ZnCl2作为活化剂)制得污泥活性炭,全面研究了污泥活性炭对活性艳红K-2BP、酸性大红GR和直接紫N这3种染料的吸附动力学行为。
6)  Kinetics [英][ki'netiks]  [美][kɪ'nɛtɪks]
吸附动力学
1.
The kinetics and thermodynamics of Pb~(2+)?Cd~(2+)?Ni~(2+)?Ag~+ adsorption on a low-cost adsorbent,natural vermiculite,were studied under the condition of pH=4~5,t=(20±1) ℃.
其吸附动力学可用拟二级速率方程来描述,计算值与实测值吻合甚好,相关系数达到0。
2.
The kineticsindicated that PA and H103 were intermediate speed adsorbents, while XAD-4 is low speed adsorbent during their applicationson TP.
本文主要研究了PA、H103及XAD-4树脂在茶多酚吸附分离体系中的吸附热力学特性及吸附动力学特性。
3.
Effects of pH and NaCl on the adsorption of p-nitrophenol(PNP)onto activated carbon fiber(ACF)were studied;adsorption isotherms were measured at different temperatures;the thermodynamics and kinetics of the adsorption were also studied.
假二级反应动力学模型很好地拟合吸附动力学实验数据。
补充资料:动力机械:内燃机动力学

研究内燃机运转中的力学现象的科学。其主要任务是研究分析内燃机运转时各主要零件的运动规律及其受力情况﹐用以作为内燃机零件设计﹑计算的依据。它还研究这些力对内燃机动力装置的影响及其消减方法。内燃机动力学的主要内容为曲柄连杆机构运动学﹑曲柄连杆机构动力学和内燃机平衡分析等。


曲柄连杆机构运动学 研究曲柄﹑连杆﹐尤其是活塞的运动规律。活塞作周期性往复运动时的位移、速度和加速度可用下述各式近似求算


 


式中为曲轴转角﹔ 为曲轴旋转角速度﹔为曲柄半径﹔为曲柄半径 与连杆长度之比﹐即 /


曲柄作回转运动﹐连杆作复杂的平面运动。连杆的运动往往被简化分解为随活塞组的往复运动和随同曲柄的旋转运动。


 曲柄连杆机构动力学 研究分析曲柄连杆机构(见曲柄滑块机构)在运动中力的生成﹑传递和输出。作用在曲柄连杆机构上的力有曲柄连杆机构运动时产生的往复惯性力和离心惯性力﹐以及内燃机气缸内的气体压力。


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条