1)  Chlorofluorocarbon
氟氯碳
2)  the Fluorcarbon oil
氟氯碳油
1.
The tribological performance of the Fluorcarbon oil additives were evaluated on a four ball friction tester.
用四球机考察了氟氯碳油添加剂在矿物油中的抗磨减摩性能;用 SEM 分析了磨斑表面的形貌和元素组成,探讨了其润滑作用机理。
3)  halocarbons
氟氯碳化合物
1.
Study on the impact of increasing concentrations of CH_4 and N_2O in atmosphere on O_3 destruction by halocarbons and ODP;
大气中CH_4和N_2O浓度变化对氟氯碳化合物损耗O_3及ODP的影响
2.
Study on simplifying the calculations of ozone depletion potentials of halocarbons;
简化计算氟氯碳化合物臭氧消耗潜势的研究
3.
Two kinds of parametric equatoins have been formulated to calculate ozone depletionpotential(ODP)of hydrochlorofluorocarbaons and chlorofluorocarbons based on a study onthe difference in the ODP of same kind of halocarbons and the relation between ODP andrelevant parameters.
在研究同类氟氯碳化合物臭氧消耗潜势（ＯＤＰ）之间的差异，探讨ＯＤＰ与有关参数必然的内在联系的基础上，建立起两类求算ＨＣＦＣｓ、ＣＦＣｓ的ＯＤＰ的参数方程。
4)  fluorochloroaniline
氟氯苯胺
1.
Synthesing 3-chloro-4-fluoronitrobenzene from 3,4-dichloronitrobenzene with fluorinating method is one of important technology in manufaturing fluorochloroaniline.
由3,4-二氯硝基苯制备3-氯-4-氟硝基苯是氟氯苯胺制备中的重要一步,研究了影响氟化反应收率的因素,并确定了合理的工艺条件为:n(KF)∶n(3,4-二氯硝基苯)=1。
2.
Synthesing 3,4-dichloronitrobenzene from o-dichlorobenzenewith nitrating method is the first process and also one of important technology in manufaturing fluorochloroaniline.
由邻二氯苯经硝化合成３，４－二氯硝基苯是氟氯苯胺制备的第一步，也是关键性工艺。
5)  flucloxacillin
氟氯西林
1.
A Study of the Effect of Peroral Flucloxacillin in the Prevention of Infection after Cesarean Section;
剖宫产术后患者口服氟氯西林预防感染的疗效观察
2.
Detection for amoxillin/flucloxacillin Capsules by HPLC;
高效液相色谱法测定阿莫西林/氟氯西林钠胶囊溶出度
3.
A HPLC method was established for the determination of ampicillin, flucloxacillin and related substances in co-fluampicil capsules.
建立了HPLC法测定复方氨苄西林-氟氯西林胶囊含量及有关物质。
6)  chlorofluorocarbons
氟氯烃
1.
Hazards of chlorofluorocarbons and development situations of its substitute;
氟氯烃的危害及替代物的发展现状
2.
An analytical technique has been established for rapid and accurate measurement of three anthropogenically produced chlorofluorocarbons(CFCs),CCl_3F(CFC-11),CCl_2FCClF_2(CFC-113) and CCl_4 in seawater.
建立了吹扫捕集气相色谱法测定海水中氟氯烃的方法。
3.
The result of chlorofluorocarbons(CFCs)determination showed that the highest concentration of CFC-11 and CCl_4 in the surface water are 6.
中国第二次北极科学考察期间(2003年7—9月)于加拿大海盆采集了9个站位的水样,用于氟氯烃(CFCs)的分析。
参考词条
补充资料：氯氟碳塑料
分子式：
CAS号：

性质：又称氯氟烃塑料。结构中含有氟原子、氯原子和碳原子的塑料总称。具有良好的化学稳定性和不燃性。电绝缘性、耐老化性、机械性能好。透明度高，加工性好，与金属黏结性好。可用于化工用贮槽、罐、泵、阀门、搅拌桨叶等的防腐衬里，带丝扣的管、透明视镜、实验器皿，电子电气工业用电线绝缘和电缆护套等。如聚三氟氯乙烯(PCTFE)结构式为{CF2-CFCl}n，是一种结晶性聚合物，密度为2.07～2.18，玻璃化温度58℃，熔点215℃，长期使用温度-200～200℃，失强温度270℃。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。