1) Fe=Si_3N_4
Fe-Si3N4
2) Silicon nitride-ferro
Si3N4-Fe
3) Fe/Si_3N_4 multilayers
Fe/Si3N4多层膜
4) Si_3N_4
Si3N4
1.
Fabrication and Simulation of Silicon-on-Insulator Structure with Si_3N_4 as a Buried Insulator;
以Si3N4为埋层的SOI结构制备与器件模拟(英文)
2.
Three experimental schemes were executed to validate the feasibility of producing the V-bearing HRB400 bar with Si_3N_4 alloy as nitrogen alloy reagent.
通过3种试验方案,系统研究了Si3N4合金作为增氮剂用于生产V微合金化Ⅲ级钢筋的可行性。
3.
Synthesis of silicon nitride powder is the basis of fabrication of Si_3N_4 ceramics.
Si3N4陶瓷因其优异的力学性能和化学稳定性而在工业生产中广泛使用。
5) silicon nitride
Si3N4
1.
silicon nitride (Si_3N_4) ceramics were bonded by the adhesive, and the bonded specimens were heat-treated within 300～800℃ subsequently.
以酚醛树脂为基体,加入B4C作为改性填料制备出高温粘结剂,并对Si3N4陶瓷进行粘接。
2.
The addition of the dispersant can make the isoelectric point of silicon nitride slurry move ahead,and make the slurry become better.
结果发现:Si3N4悬浮粒子的等电点在pH=4。
3.
The crack resistance behaviour of two kinds of silicon nitride ceramics which have different microstructure was determined, and the crack closure (bridging) stress distribution in the wake region of the crack tip was also estimated.
测定了 2种不同显微结构的Si3N4 材料的阻力行为 ,并对裂纹扩展过程中的裂尖尾区闭合应力进行了估算 。
6) Si 3N 4
Si3N4
1.
This paper deals with an experimental study on the surface roughness of Si 3N 4 ceramics by WEDM-HS.
分析研究高速走丝电火花线切割加工Si3N4 陶瓷材料时影响表面粗糙度的主要因素 ,并提出了改善表面粗糙度的方
2.
Three kinds of sintering aids MgO, Al 2O 3+AlN and Y 2O 3+AlN are chosen and effect of them and their contents on mechanical properties of pressurelessly sintered (1 800℃×3 h) Si 3N 4 is investigated.
研究了三种助烧剂MgO、Al2 O3+AlN和Y2 O3+AlN对 1 80 0℃× 3h工艺下无压烧结Si3N4力学性能的影响情况。
补充资料：Fe-Si alloy
分子式：
CAS号：
性质：含硅0.5％～4.5％的铁硅合金。为硅在铁中的置换固溶体，属立方晶系。饱和磁感应强度为1.6～1.9J，铁损1～8W/kg。除了冲片使用外，常做成薄带，卷绕成铁芯。采用冷轧或进而热处理的方法获取结构(晶粒定向排列)。电力工业中用于电机、变压器等。电子工业中主要用于电源变压器、磁放大器等。
CAS号：
性质：含硅0.5％～4.5％的铁硅合金。为硅在铁中的置换固溶体，属立方晶系。饱和磁感应强度为1.6～1.9J，铁损1～8W/kg。除了冲片使用外，常做成薄带，卷绕成铁芯。采用冷轧或进而热处理的方法获取结构(晶粒定向排列)。电力工业中用于电机、变压器等。电子工业中主要用于电源变压器、磁放大器等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条