1) integrative coating
一体化涂层
1.
In this paper, the optimum ingredient of the integrative coating was determined and the intergrative coating was prepared by choosing the resins, adjusting the value of PVC and studying the ingredient proportion.
通过对树脂体系的筛选、颜料体积浓度的调整及成分配比研究,确定了耐候、耐热、防静电一体化涂层的最佳配方,制备了综合性能优良的浅色防静电涂层。
2) integration of coatings and finishing
涂料涂装一体化
4) coated conductor
涂层导体
1.
Structure analysis of Ni-7%W alloy substrate used for coated conductor
涂层导体用Ni-7%W合金基带的织构分析
2.
The high performance Yttrium Barium Copper Oxide (YBCO) coated conductor is promising in electric applications such as cables, motors, energy storage and magnets, due to its high irreversibility field at 77 K.
本文在具有双轴织构的10m级NiW合金基带上动态、连续地制备了具有Y2O3,YSZ,CeO2等多层隔离层的YBCO涂层导体;研究了膜的生长条件及各层膜之间的取向关系等,成功地制备出10m长双轴取向的CeO2/YSZ/Y2O3隔离层,Y2O3,YSZ和CeO2的!扫描半高宽沿长度方向都分布在7°～8。
3.
An overview of the recent progress of 2 G superconductor tapes was provided,and the structures and the fabrication techniques of coated conductor on Ni and Ni.
综述了近年来二代超导带材的发展状况,并对在镍和镍合金基带上制备涂层导体的工艺技术以及其基本结构特征做了较为系统的介绍,包括基带的制备技术、隔离层的生长、化学法和物理气相沉积法生长YBCO等。
5) coating system
涂层体系
1.
The performance of the selected coating systems was experimentally verified,while some of the selected costing systems were brought into engineering practice.
结果显示,对完全浸泡的设备,采用环氧富锌底漆+环氧云铁中间漆+改性环氧面漆的涂层体系有很好的防护效果;对干湿交替的设备采用环氧富锌底漆+环氧云铁中间漆+丙烯酸聚氨酯面漆的防护体系具有良好的防护性能,预计其防护寿命可达到8a以上。
2.
In this dissertation, the properties of various FEVE paints were studied, and so the basic data of FEVE paints were accumulated; High-performance FEVE paints, and FEVE / CNTs paints were prepared, and the dirt resistance of FEVE paints were investigated; the design of FEVE coating systems and the strict control of construction quality were also studied.
氟碳防腐涂层体系按GB/T1865人工加速老化5000h后漆膜很轻微变色、很轻微失光;耐盐雾5000h漆膜无异常;北京地区自然曝晒4年,不变色、不失光;海南地区曝晒2年,不变色、轻微失光。
3.
The meanings of coating,coating film and coating system are analyzed respectively based on the theory and method of systematic engineering.
应用系统工程的理论和方法,分析了涂装、涂层、涂层体系概念的含义,引入了"涂装涂层系统"的概念,叙述了组成系统的"五阶段"、"五要素"、"三层次"的主要内容,初步建立了"涂装涂层系统"的模型,对于解决与涂装有关的复杂工程问题有重要的意义。
6) coating-substrate
涂层-基体
补充资料：铝化物涂层
分子式：
CAS号：
性质：以铝为主要组元的一类扩散型抗高温氧化无机涂层体系。涂层结构大致分为三层:最外层是结构致密的氧化铝膜，中间层是铝与金属基体形成的金属间化合物，内层为扩散进入少量铝原子的基体层。涂层中往往还加入铬、硅、锰和稀土类元素进一步改善抗氧化性能，涂覆方法有包埋渗涂、料浆喷涂、热浸渗涂、等离子喷涂和物理气相沉积等。
CAS号：
性质：以铝为主要组元的一类扩散型抗高温氧化无机涂层体系。涂层结构大致分为三层:最外层是结构致密的氧化铝膜，中间层是铝与金属基体形成的金属间化合物，内层为扩散进入少量铝原子的基体层。涂层中往往还加入铬、硅、锰和稀土类元素进一步改善抗氧化性能，涂覆方法有包埋渗涂、料浆喷涂、热浸渗涂、等离子喷涂和物理气相沉积等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条