1) Micro-hole pottery film
微孔陶瓷覆膜
2) polymer-coated ceramic powder
覆膜陶瓷
1.
The thermal stress field in the polymer-coated ceramic powder product during selective laser sintering was studied.
研究覆膜陶瓷粉末在选择性激光烧结过程中的热应力场 ,分析烧结过程中各种工艺参数同烧结件质量之间的关系。
3) Al 2O 3 microporous membranes
微孔Al2O3陶瓷膜
4) ceramic microporous tube
陶瓷微孔膜管
1.
Research on microbubbles generated by ceramic microporous tube
陶瓷微孔膜管制造微气泡的研究
2.
This condition of using ceramic microporous tube to produce microbubbles by high-speed cross-flow and the effect of Liquid properties on the initial bubble size distribution were studied.
研究了利用陶瓷微孔膜管在高速剪切流剪切作用下形成微气泡的条件,流体物性对气泡粒径分布的影响。
5) micro-porous ceramics
微孔陶瓷
1.
Methods and techniques for preparation of micro-porous ceramics as filtration media in water treatment are presented and reviewed in this paper wherein micro -pore formation and moulding are pointed to be two key steps for the preparation.
对水处理过程中用作过滤材料的微孔陶瓷制备方法进行了评述,指出成孔技术和成型方法是制备工艺的关键,提出了比较有前途的制备微孔陶瓷的新原料及相应的制备方法。
2.
According to the characteristicsofmicro-porousceramics,the filtration theory of micro-porous ceramics as filtration media in water treatment is discussed in this paper.
本文从微孔陶瓷的结构特性出发,分析了微孔陶瓷作为过滤介质在水处理除杂净化过程中的过滤机理,论述了微孔陶瓷在饮用水净化处理和某些工业废水、生活污水处理中的应用。
6) porous ceramic membrane
多孔陶瓷膜
1.
CFD modeling of permeate process in 19-channel porous ceramic membranes;
19通道多孔陶瓷膜渗透过程的CFD模拟
2.
According to the urgent demand of deep treatment in dyeing wastewater,this paper studied the advanced treatment of dyeing wastewater by new type combined porous ceramic membrane reactor,which include the new type moving bed bioreactor and porous ceramic technology.
本文针对印染废水急需深度处理的现状,对新型多孔陶瓷膜组合反应器深度处理印染废水一级出水进行了研究,反应器采用新型移动床生物膜处理加多孔陶瓷膜的组合工艺,为工程上应用提供参考。
补充资料：多孔陶瓷支撑体膜
分子式：
CAS号：
性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
CAS号：
性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条