1) oil coke slurry
油焦浆
1.
Under low speed heating conditions the combustion characteristics of oil coke slurry (mixture of petrol coke powder and heavy oil) and water coke slurry (mixture of petrol coke powder and water) were studied through the use of a thermogravimetric analytical method.
运用热重分析法研究了慢速加热条件下油焦浆 (石油焦粉和重油混合物 )、水焦浆 (石油焦粉和水混合物 )的燃烧特性 ,并与石油焦和煤粉的燃烧特性进行了比较。
2.
The paper describes the oil coke slurry which is the mixture of petrol coke powder and water of reject of the oil refinery and its specificity,and describes the atomizing performance,operation performance,and the actual operation result in the boiler in power plant of the oil coke slurry burners as it replaces the fuel oil.
介绍一种利用炼油厂下脚料油焦与水混合制作的油焦浆混合物及其特性,并简要介绍了将油焦浆替代电厂燃油时油焦浆枪的雾化性能、运行性能及在电厂中的实炉应用效果。
2) petro coke residue slurry
油焦浆
1.
Applied experiment of petro coke residue slurry in rotary kiln;
油焦浆在回转窑上的应用试验
2.
Based on the discussions,a new mixture of petro coke and vacuum residue——petro coke residue slurry,as a partial alternative for fuel oils in the industrial boilers was proposed.
评述了煤浆燃料应用发展历史、现状及其在燃油锅炉中燃烧面临的问题，并在此基础上提出了用石油焦和减压渣油的混合物——油焦浆代替燃料油在燃油锅炉上燃烧以节省部分燃料油。
3) Oil-Coke-Water slurry
油焦水浆
1.
Oil-Coke-Water slurry is fluent fuel consisted of coke, water and oil.
油焦水浆是利用石油焦的高热值、低价格、低灰分代替部分燃料油,制备石油焦、水和燃料油的三元流体燃料。
4) water petroleum coke slurry
水-石油焦浆
5) petroleum coke residual oil slurry
石油焦渣油浆
1.
By considering variation of physical properties and viscosity dissipation on heat transfer for high viscosity POS(petroleum coke residual oil slurry),a mathematical model to describe flow and heat transfer of POS in heated pipe has been established.
通过考虑高粘度非牛顿流体石油焦渣油浆的变物性和粘性耗散的影响，建立了它在管内流动和传热过程的数学模型；采用ＳＩＭＰＬＥＲ算法进行了数值求解并将计算结果与试验结果进行了比较；还考察了加热过程中流体平均温度上升规律及管内流速和管径大小对传热过程的影
6) petroleum-coke water slurry
石油焦水煤浆
1.
The gasification process of petroleum-coke water slurry(PCWS) in a multi-nozzle fitted new-type coal water slurry(CWS) gasification furnaces has been numerical calculated.
对石油焦水煤浆(PCCWS)在多喷嘴新型水煤浆气化炉内的气化过程进行了数值计算,考察了气化炉内的温度分布、各种气化产物浓度分布规律。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条