2) shear force
切力，剪力
3) hydraulic shear stress
水力剪切力
1.
High hydraulic shear stress helps to cultivate the more compact and settleable aerobic granular sludge and promote the metabolisms of microorganisms.
好氧颗粒污泥具有沉降性能好、承受有机负荷高等特质,较高的水力剪切力有助于形成结构密实、沉降性能良好的颗粒污泥,并可促进微生物的代谢活性,能有效地去除重金属和结构复杂的高分子有机物等难降解物质。
2.
This paper quantitatively studied the effect of hydraulic shear stress on adhesion of nitrifying bacteria on PS surface using Radical Flow Chamber.
应用辐射流动室（ＲａｄｉｃａｌＦｌｏｗ Ｃｈａｍ ｂｅｒ，ＲＦＣ）技术定量地研究了水力剪切力对硝化细菌在聚苯乙烯（ＰＳ）载体表面固定的影响，发现水力剪切力直接影响硝化细菌的固定。
4) cutting force
切削力
1.
Study on the friction coefficient of PCBN compact based on cutting force;
基于切削力的PCBN复合片表面摩擦系数研究
2.
Study on Cutting Force and Tool Life in Ti6Al4V High Speed;
硬质合金刀具高速干车削Ti6Al4V切削力及刀具寿命研究
3.
Study on Tool Wear and Cutting Force of Cemented Carbides in Milling Ti6Al4V;
硬质合金刀具铣削Ti6Al4V时刀具磨损及切削力研究
5) shear stress
剪切应力
1.
Study on shear stress induced osteoblasts K+ channel opening;
剪切应力诱导成骨细胞钾离子通道开放的研究
2.
Role of endothelium-derived hyperpolarizing factor in shear stress-induced endothelium-dependent relaxations of rats;
内皮依赖性超极化因子在剪切应力引起的内皮依赖性舒张反应中的作用
3.
Expression of HIAP-2 in human umbilical vein endothelial cells after shear stress;
血流剪切应力刺激后人脐带内皮细胞HIAP-2的表达
6) milling force
切削力
1.
The morphology of the chips and the milling forces at various speeds were investigated.
使用直径为12mm的TiAlN涂层整体圆柱立铣刀,以151~942m/min的切削速度,对硬度为HRC41的P20淬硬钢进行了高速铣削试验,考察了各种切削速度下的切屑形态和切削力。
2.
The empirical model for the prediction of milling forces in high speed end milling of 1Cr18Ni9 corrosion resistant steel is developed.
基于概率统计和回归分析原理,对回归方程进行了显著性检验,并建立了1Cr18Ni9不锈钢的切削力经验模型。
3.
The morphology of the chips,chip microhardness,chipping temperature,and the milling forces at various speeds are investigated.
使用TiAlN涂层整体圆柱立铣刀,对P20淬硬钢(41HRC,32HRC)进行了高速铣削试验,考察了各种切削速度下的切屑变形、微观硬度、切削温度和切削力。
补充资料：切向力
物体作曲线运动时，在其轨道切线方向上所受到的力。它使物体获得切向加速度。如平抛运动中，重力的切向分力将产生切向加速度，使物体的切向速度逐渐增大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条