1) automatic powder feeding
自动送粉
1.
With techniques of vibrating focusing beam and automatic powder feeding, a faultless laser cladding layer of Ni based alloy with single track width of 12 mm and thickness of 0.
利用振荡聚焦光束和自动送粉技术 ,获得单道宽 12mm以上、组织致密无缺陷的镍基合金激光熔覆层 ,并对其硬度分布、组织及成分进行了分析和测
2.
On the basis of an analysis on the feeding pattern of the coating material and its behavior in the laser beam during the process of laser coating with automatic powder feeding, a heat equilibrium equation was established and expressions relating the parameters in the process were obtained.
在分析自动送粉式激光熔覆过程中熔覆材料颗粒加入方式及其在激光束中的行为的基础上，建立热平衡方程，推导出反映熔覆过程实际情况的参数：熔覆材料颗粒尺寸、在激光束中运动距离、加热温度、激光功率密度之间的相互关系式等。
2) auto-drilling
自动送钻
1.
Research on Pressure Control System of Auto-drilling Based on Fuzzy Self-adaptive PID Theory;
基于模糊自适应PID算法的自动送钻钻压控制系统研究
2.
Research on Bit Pressure Control System of Auto-drilling Based on BP Theory;
基于BP算法的自动送钻钻压优化控制技术研究
3) automatic feeding
自动送料
1.
The die, with the hopper-type automatic feeding device, is used for bending various V-shaped, U-shaped and bow-shaped parts and suitable for mass serial production.
介绍了在通用冲床上使用的漏斗式自动送料弯曲模的结构形式、工作过程和设计要点。
2.
Through the design of the progressive die for the cover gate, the structure and the working process of the mechanism of automatic feeding for the progressive die that realized by utilizing the back_and_forth action of the sliding block of the pressing machine were introduced.
通过罩门级进模设计介绍了一种利用压床滑块往复运动实现带料自动送料机构的结构及工作过程。
4) automatic feed
自动送料
1.
The design and application of an automatic feed mechanism with changing step;
一种可变步距自动送料机构的设计及应用
2.
Through analyzing on the structure characteristics of the spring piece, designed a automatic feed progressive die.
通过分析弹簧片零件的构造特点,设计出了一幅自动送料的级进冲模。
3.
The die with automatic feed is used on a general press.
论述了用在通用冲床上的接线柱自动送料、切槽、切断级进模的结构形式、工作过程,提出了确定压料滚珠直径的方法。
5) automatic transport
自动输送
1.
Analyzing spot condition of filter tip stick product line in the cigarette factory , this paper introduces automation and web control process using PLC+PC , including data collection disposal ,all checking control and system monitor management of glycerol fat used for filter tip stick production automatic transport system.
本文通过对卷烟厂的过滤嘴棒生产线的现场条件分析,介绍了用PLC+PC实现对生产过滤嘴棒的甘油脂自动输送系统的数据采集处理、各环节检测控制、系统监控管理等自动化、网络化控制过程。
2.
This article is a part of study on tissue culture plantlet transplant robot, which designs the automatic transport system of tissue culture plantlet.
本课题为组培苗移植机器人研究的一部分,设计了组培苗自动输送系统。
6) automatic bit feed
自动送钻
1.
A study of a DRNN-based smart control experimental system for use with automatic bit feed on rig;
基于DRNN神经网络的石油钻机自动送钻系统智能控制研究
2.
Fuzzy optimum control of automatic bit feed on rig;
钻机自动送钻系统模糊最优控制
3.
Research on simulating experimental system for automatic bit feed.;
钻机自动送钻模拟实验系统的研究
补充资料：后勤指挥自动化系统(见后勤指挥自动化)
后勤指挥自动化系统(见后勤指挥自动化)
automated system of logistic command
houqin zhihui zidonghua xitong后勤指挥自动化系统(automated、ys-tem of logistie eommand)见后勤指挥自动化。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条