1) B type inclusion
B类夹杂
1.
In this paper, the removal of B type inclusions is studied in terms of deoxidation process, a FeO , agitation and modification The reasonable dexidation process and the parameters, which promote the removal of B type inclusions is put forward as a basis to produce clean stee
从脱氧工艺、a Fe O、搅拌和变性处理等方面对 B类夹杂的去除进行了试验研究。
2) D type inclusions
D类夹杂物
1.
The D type inclusions in steel can be effectively removed by reducing the aluminum wire-feeding quantity,lowering the basicity of furnace slag,controlling the Al_2O_3 content,ensuring the slight stirring time and enhancing the slag floating-up.
减少铝线喂入量,降低炉渣碱度、控制渣中Al2O3含量可有效减少D类夹杂物的生成。
3) Cavity induced by inclusions
夹杂类孔洞
4) laminated-glass B
B类夹层玻璃
5) inclusion
[英][ɪn'klu:ʒn] [美][ɪn'kluʒən]
夹杂
1.
Effect of 80 t Converter-Ladle Argon Stirring-Concasting Steelmaking Process on Gas and Inclusion Content in Steel Q235A;
80t转炉-钢包吹氩-连铸冶炼过程对Q235A钢气体夹杂含量的影响
2.
A primary investigation for the rapid determination of oxide inclusion in steel by differential heating method;
差热法快速测定钢中氧化夹杂的初探
6) impurities
[英][im'pjuəriti] [美][ɪm'pjʊrətɪ]
夹杂
1.
From the transversal section of columnar grains,it can be seen that impurities composed by oxide of Cr and Mn are observed in grain boundaries in this region.
结果表明:在铸坯断口表面出现了明显的过烧现象,断口附近存在明显的脱碳区域;同时在断口附近的柱状晶横截面内还观察到了Cr、Mn的氧化物夹杂以及沿晶界存在断续的内部裂纹,而且这些裂纹内壁发生了严重氧化;在铸坯的心部区域观察到了很多尺寸不均、内壁光滑的不连续的孤立孔洞。
2.
Surface blisters of 2017 alloy annealed bars are formed in laminated surface including impurities.
该批2017合金退火棒材表面产生气泡是由于挤压棒材中的成层缺陷引起的夹杂型表面起泡所致。
补充资料:非茶类夹杂物检验
非茶类夹杂物检验
foreign matter inspection of tea
非茶类央杂物检验(foreignm:insPection of tea)茶叶检验之一。杜入茶叶中非茶类物质的技术措施。非茶类物质仑物性的虫体、羽毛、虫卵.植物性的竹片、木泵叶、杂草、籽粒和矿物性的铁屑、砂粒、泥土粤叶检验标准规定“茶叶必须洁净,不得含有非寺杂物。”其检验方法有两种: 筛检法检测5目方孔啼上的大型夹杂物。夹杂物,体积较大,比较醒目。检验时按规定按批筛检一定数量的样品,然后检点夹杂物个教以筛检量(千克),以个/千克表示。小包装茶多按盒计算,检点有夹杂物的盒数,除以筛检总唁袋)数,以百分率表示。 手检法检侧5孔筛以下的物质。检验时耳混匀的茶叶100克,倒在干净、光滑的白纸上,磁铁前后左右来回耙动,检查有无铁屑吸出。异镊子逐一检出其他非茶类夹杂物,一起合供称团算其夹杂物含量,以毫克/千克表示。 (严鸿叮混动树茶夹类蛛除物爪沦州绒季望幻封法,烈听分以用计充龙后必
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条