说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 水基磨削液
1)  Water based grinding fluid
水基磨削液
2)  water-based metal cutting liquid
水基切削液
3)  water based cutting fluid wastewater
水基切削液废水
4)  grinding fluid
磨削液
1.
Exploration on Titanium Alloy's Efficient Grinding Fluids
钛合金高效磨削液的探索
2.
In such a grinding process there is a high-speed airflow rotating around the edge of grinding wheel to hinder the grinding fluid from injecting into the ground area so as to decrease its entering rate into the area and affect the cooling effect and greenness during grinding.
快速点磨削是一种新型高速/超高速磨削加工技术,由于砂轮极高的线速度会在砂轮周围产生高速旋转的空气带,对磨削液注入磨削区产生阻碍作用,降低磨削液进入磨削区的比率,因而会对磨削过程和加工的绿色度产生影响。
3.
Effect of grinding fluid on grinding performances of vitrified bonded CBN wheel was analyzed.
分析了磨削液对陶瓷结合剂CBN砂轮磨削性能的影响,使用3种磨削液在精密外圆磨床M1420E上进行了磨削加工实验,用加工表面微观形貌、表面粗糙度Ra值、工件表面残余应力以及砂轮径向磨损量对磨削液效能进行评价。
5)  grinding fluids
磨削液
1.
Aiming at the special require of ultra-high speed grinding processing, the mechanisms and characteristics of grinding fluids in ultra-high speed grinding processing is investigated.
磨削加工中,磨削液起着重要的作用。
2.
Three different test methods for grinding performance evaluation of grinding fluids were used to investigate the influence of three kind grinding fluids on grinding process.
针对磨削液的使用性能 ,按四球试验法、攻丝扭矩模拟评定试验法、磨削加工试验法对三种磨削液进行了性能试验研究。
3.
Oil additives and extreme pressure additives are the main wear-reducing composition in grinding fluids.
油性及极压添加剂为磨削液中主要减摩添加剂,本文从物理及化学两个方面分析了两种添加剂在磨削过程中的作用机理,说明了两种添加剂的相辅作用,并采用不同的磨削液进行了实验验证。
6)  coolant [英]['ku:lənt]  [美]['kulənt]
磨削液
1.
Water based coolant is thought to be suitable for poilshing steel ball due to its little pollution to environment when resin bond fine grit abrasive wheel is used.
本文针对钢球磨削液存在的问题 ,研究了反应时间、温度、搅拌速度、加料时的温度以及冷却方式等条件对磨削液性能的影响。
补充资料:水基冻胶压裂液
分子式:
CAS号:

性质:用交联剂将水中聚合物交联而得的压裂液,它的主要组成是水、成胶剂、交联剂、破胶剂。其中成胶剂主要是指稠化剂;交联剂多用无机盐,如铬盐、锑盐、铝盐,不过这类交联剂只适于低温,如用于高温(一般指120℃以上),则需加热稳定剂,如Na2SO4等。另外,也可用油田用高温交联剂(有机钛、有机锆等);破胶剂主要是用过氧化物,其作用是经过一段时间后使冻胶破胶液化,易于排出地层。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条