1) aviation turbine oil
航空涡轮润滑油
1.
The working conditions and the demands on lubricity of aviation turbine oils were analyzed.
分析了航空涡轮润滑油的工作条件及其润滑性能的要求,简述了极压抗磨剂的作用机理和种类,并着重讨论了极压抗磨剂在航空涡轮润滑油中的应用情况与发展趋势。
2) turbine oil
涡轮润滑油
1.
The characteristic requirement and oxidation course of aviation turbine oil was briefly analyzed, the kind of antioxidant and its action mechanism were described, and application and development of antioxidant in aviation turbine oil were discussed emphatically.
分析了航空涡轮润滑油的抗氧化性能要求及其氧化过程,介绍了抗氧剂的种类和作用机理,并着重讨论了抗氧剂在航空涡轮润滑油中的应用与发展。
2.
A new method of quickly determining sludge in turbine oils during oxidation process with gel permeation chromatography(GPC) was studied.
研究了用凝胶渗透色谱法(GPC)快速确定涡轮润滑油中的沉积物。
4) Aviation lubricating oil
航空润滑油
1.
Simultaneous Determination of Trace Elements Al,Mg and Cu in Aviation Lubricating Oil by MPT-AES;
MPT-AES同时测定航空润滑油中的铝、镁和铜
2.
It is determined the magnesium corrosion property of aviation lubricating oil by wet heat test and electrochemical impedance spectroscopy.
用湿热试验法和电化学交流阻抗法评价航空润滑油的镁腐蚀,可以判定航空润滑油的镁腐蚀性能。
3.
The methods of obtaining the high temperature antioxidants for ester aviation lubricating oil through improving amine antioxidants and the research development of synergy antioxidants were depicted briefly, the recent research of anti -oxidation mechanism was reviewed also.
简要介绍了通过对胺型抗氧荆的改性来获得酯类航空润滑油高温抗氧剂的方法和协合抗氧剂的研究进展,并对抗氧化机理研究的最新进展进行了综述。
5) aviation lubricant
航空润滑油
1.
Based on the improved test rig,the traction coefficients of aviation lubricant No.
在改进的拖动力试验装置上, 对 4109国产航空润滑油进行了不同条件下的拖动系数的测量; 通过对试验数据进行回归分析求得了平均极限剪切应力与剪切弹性模量的值并拟合出了经验计算公式。
6) aircraft lubricating oil
航空润滑油
1.
The oxidation stability of aircraft lubricating oils was studied with corrosion and oxidation stability tests The domestic aircraft lubricating oils based esters and those of the same class in Russia were tested and evaluate
用腐蚀和氧化安定性试验研究了航空润滑油的氧化安定性。
补充资料：航空喷气机润滑油
分子式：
分子量：
CAS号：
性质：主要用于涡轮喷气航空发动机的润滑油。有良好的高温抗氧性及低温流动性。闪点（闭杯）不低于140℃。凝点不高于-55~60℃。密度不大于0.885。以原油或软蜡裂解所得烯烃经合成加工制得的基础油，再加入抗氧添加剂调制而成。按不同的加工工艺分为8A和8B两个牌号。
分子量：
CAS号：
性质：主要用于涡轮喷气航空发动机的润滑油。有良好的高温抗氧性及低温流动性。闪点（闭杯）不低于140℃。凝点不高于-55~60℃。密度不大于0.885。以原油或软蜡裂解所得烯烃经合成加工制得的基础油，再加入抗氧添加剂调制而成。按不同的加工工艺分为8A和8B两个牌号。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条