1) silicon based polymer drilling fluid
有机硅聚合物钻井液
2) silicofluoric polymer drilling fluid
硅氟聚合物钻井液
1.
Based on optimizing drilling fluid additives for high temperature condition, and by introducing new silicofluoric polymer GF-260 as a viscosity reducer, a new silicofluoric polymer drilling fluid for high temperature was developed.
室内试验在优选抗高温处理剂的基础上,通过引入新型的硅氟共聚物降粘剂GF260,开发出了一种新型抗高温硅氟聚合物钻井液,即4%钠膨润土+3%MMH+5%MF1(复合降滤失剂)+2%Na2SO4(抗高温稳定剂)+2%RH1+2%GF260+1%ZHⅢ(缓蚀剂)+其它辅剂。
3) inorganic-organic monomer polymer drilling fluid
无机-有机单体聚合物钻井液
1.
The formula of inorganic-organic monomer polymer drilling fluid is determined from laboratory test results,which is comprised 6% bentonite,0.
确定了无机-有机单体聚合物钻井液体系配方,即由6%膨润土浆+0。
4) silicone drilling fluid
有机硅钻井液
1.
An aqueous silicone drilling fluid is prepared by using 9 additives: silicone additives (inibitory agent, stabilizer) and additives of other kinds.
由有机硅处理剂(抑制剂、稳定剂)及其他类处理剂共9种,配制成有机硅钻井液,给出了优选配方,报道了室内性能评价结果。
5) organic positive gel-polymer drilling fluid
有机正电胶聚合物钻井液
1.
Preparation and application of organic positive gel-polymer drilling fluid;
有机正电胶聚合物钻井液研制与应用
6) polymer drilling fluids
聚合物钻井液
1.
Corrosion behavior of four kinds of S135 steel in polymer drilling fluids containing CO2 is investigated using high temperature high pressure autoclave.
利用高温高压反应釜研究油田常用的四种S135钢在含CO2聚合物钻井液中腐蚀行为。
2.
84 g/cm~3) density are prepared from a blast furnace slag of a steel plant in Urumqi, commercial activator BAS-1 and dispersant MT-1 for MTC, and polymer drilling fluids taken at 5 drilling sites in Turpan-Hami oil fields are evaluated in laboratory for their performance properties at different temperatures, 65℃, 85℃, and 93℃.
用乌鲁木齐钢厂的高炉水淬矿渣(BFS),MTC激活剂BAS 1和分散剂MT 1,吐哈油田5口井使用的聚合物钻井液配制了一系列高(1 81～1 84g/cm3)、低(1 56～1 66g/cm3)密度高炉水淬矿渣固井液(BFSCF)并在不同温度下(65℃,85℃,93℃)对其性能进行了评定。
补充资料：聚合物钻井液
分子式：
CAS号：
性质： 一种水基钻井液。用水溶性聚合物调配而成。所用的聚合物为聚丙烯酰胺部分水解物及其衍生物、醋酸乙烯酯与马来酸酐的共聚物等。这种钻井液可以调节黏度，具有较好的剪切稀释特性，携砂能力强，降低滤失量，稳定地层与井眼，减少对油气层的损害以及抗高温等特性。但抗盐能力差是其缺点。
CAS号：
性质： 一种水基钻井液。用水溶性聚合物调配而成。所用的聚合物为聚丙烯酰胺部分水解物及其衍生物、醋酸乙烯酯与马来酸酐的共聚物等。这种钻井液可以调节黏度，具有较好的剪切稀释特性，携砂能力强，降低滤失量，稳定地层与井眼，减少对油气层的损害以及抗高温等特性。但抗盐能力差是其缺点。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条