1) deep acid fracturing
深度酸压
1.
This paper summarizes the present research situation and the future development of the deep acid fracturing in the carbonate rock formation, introduces the filtrauion behavior of acid fracturing with different deep, multistage injection, and the application of fractal in the acid fracturing.
综述了碳酸盐岩储层深度酸压理论研究现状 ,介绍了不同深度酸压技术的滤失特性、多级注入工艺技术的机理性研究 ,以及分形理论在酸压中的初步应用 ,预测了未来深度酸压理论研究的主要发展方
2) deep acid-fracturing
深部酸压
3) indentation depth
压痕深度
1.
The feasibility of indentation depth measured by servo gun online was studied.
首先研究利用伺服焊枪在线提取压痕深度的可行性。
2.
Meanwhile the material model behavior is established to analyze the indentation depth under the local force, calculate the hardness by the ANSYS.
材料模型属性描述的准确性在ANSYS分析中尤为关键,本文通过实验方法获得了典型材料的力学参数,特别是材料在塑性阶段的应力应变关系,并对实验数据进行了有效的整理,在ANSYS中建立了这些材料的模型属性,分析了在局部载荷下的压痕深度,计算其有限元硬度值,比较实验硬度值和有限元硬度值。
3.
The indentation depth of three-layer parquet surface layer, in the early pressure, is rapid increase in the deepening of the depth indentation.
三层实木复合地板表面层的压痕深度,在加压初期,随加压时间增加而快速加深,当加压时间超过10-15天后,压痕深度的加深十分缓慢甚至停止。
4) indentation depth
压入深度
1.
The continuous stiffness mode(CSM)was employed to measure the effect of indentation depth on the determination of hardness of thin films by means of nanoindentation.
使用磁控溅射法制备了不同调制波长的Ni/Al多层膜,利用X射线衍射(XRD)和高分辨电子显微术(HRTEM)对薄膜进行了微结构表征,采用连续刚度法(CSM)研究了不同压入深度下多层膜的硬度。
2.
The reasonable indentation depth of the thermal barrier coating system is investigated using a combination of dimensional analysis and finite element analysis.
基于有限元计算方法和量纲分析原理提出了热障涂层合理压入深度的确定方法,并研究了涂层及基体材料特性对合理压入深度的影响。
5) voltage regulation depth
调压深度
6) pressed depth
按压深度
补充资料：冲击波超压与动压