1) warm-deforation
温形变
2) thermal deformation
温度变形
1.
It is very important to study the thermal deformation occurring in mass concrete and its super-long structures,the cause of which must be made clear before studying the thermal performance of concrete.
混凝土结构温度变形性能在大体积混凝土及超长结构中非常重要,研究混凝土材料的温度变形性能有必要清楚其温度变形产生的本质。
2.
The main factors, such as limiting extended value, elastic module and thermal deformation of the influence on crack resistance of mass concrete have been analyzed in this paper.
对影响大体积混凝土抗裂性的极限拉伸值、抗拉弹性模量、温度变形等几个主要因素进行了分析,得出大体积混凝土抗裂性指标,并将其应用于评价大体积混凝土抗裂性,结果与实际工程相符,可靠有效。
3.
The main factors,including lim it ing extended value,elastic module and thermal deformation,which influenc on cr ack re sistance of mass concrete have been analyzed in this paper.
本文对影响大体积混凝土抗裂性的极限拉伸值、抗拉弹性模量、温度变形等几个主要因素进行了分析,得出大体积混凝土抗裂性指标,并将其应用于评价大体积混凝土抗裂性,结果与实际工程相符,可靠有效。
3) warm deformation
温变形
1.
The formation mechanisms of ultrafine grain of carburized 20CrMnTi steel during warm deformation;
渗碳20CrMnTi温变形超细晶粒的形成机制
2.
Spheroidizing and ultra-refining of structure in eutectoid steel during warm deformation;
共析钢温变形过程的组织球化与超细化
3.
Effect of initial microstructure on the microstructure evolution of medium carbon steel during warm deformation;
初始组织形态对中碳钢温变形组织演变的影响
4) isothermal deformation
等温变形
1.
Flow stress characteristics of isothermal deformation at high temperature for 7075 aluminum alloy;
7075铝合金高温等温变形的流变应力特征
2.
By isothermal deformation of as-cast Ti-6Al-4V (ZTC4) at different plastic technologic parameter,the regulations of deformation stress-strain and microstructure deformed have been obtained.
采用不同的塑性工艺参数对铸造Ti-6Al-4V(ZTC4)进行等温变形分析,得出变形应力-应变规律和变形后的内部组织规律;对ZTC4钛合金的原始组织进行了分析,得出原始组织形态的影响规律。
3.
An effective method for grain refining of γ-TiAl alloy was put forward based on the study results of compression behavior and microstructure evolution during isothermal deformation.
研究发现,如果γ-TiAl合金锭具有一定的细晶组织便可以在(α2+γ)2相区完成等温变形而不产生裂纹。
5) deformation temperature
变形温度
1.
Effect of deformation temperature on dynamic recrystallization of ULCB steel;
变形温度对ULCB钢动态再结晶的影响
2.
Influence of deformation temperature on the critical strain for completion of DEFT;
变形温度对形变强化相变完成时临界应变量的影响
3.
A new fractal method for the determination of deformation temperatures and strain rates-A case study of the Fuchashan tectonite in the Tanlu fault;
确定变形温度和应变速率分形法的探讨——以郯庐断裂浮槎山构造岩为例
6) Deforming Temperature
变形温度
1.
Effect of Deforming Temperature on Structure and Precipitates of 0.05C-0.13Nb Steel;
变形温度对0.05C-0.13Nb钢组织和析出物的影响
2.
The static softening in interval time increased with the increasing of deforming temperature,interval time and deformation,re-crystallization of austenite was easier to occu.
利用MMS-100热力模拟试验机研究了X60管线钢和JB700低碳贝氏体钢在不同变形温度、变形程度和变形后等温保持时间对奥氏体静态软化行为的影响。
3.
In this paper,with uniaxial tensile test of AA5083 aluminum alloy,we analyze and discuss the influence of deforming temperature and strain rate on elongation.
通过对铝合金AA5083超塑性材料的拉伸试验,分析和讨论了变形温度和应变速率对其延伸率的影响,并得到最佳温度525℃,最佳应变速率1。
补充资料：春暮过石龟谷题温处士林园（一作送温逸人）
【诗文】：
隐几无名老，何年此陆沈。丘园自得性，婚嫁不婴心。
岁计因山薄，霞栖在谷深。设罝连草色，晒药背松阴。
触兴云生岫，随耕鸟下林。支颐笑来客，头上有朝簪。
【注释】：
【出处】：
全唐诗：卷238_41
隐几无名老，何年此陆沈。丘园自得性，婚嫁不婴心。
岁计因山薄，霞栖在谷深。设罝连草色，晒药背松阴。
触兴云生岫，随耕鸟下林。支颐笑来客，头上有朝簪。
【注释】：
【出处】：
全唐诗：卷238_41
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条