1) polyurethane(polyurea) elastomer
聚氨酯（脲）弹性体
2) PUU elastomer
聚氨酯脲弹性体
1.
The influence of chain extension coefficient on properties of PUU elastomers modified by isocyanurate was studied.
考察了扩链系数对异氰脲酸酯改性的聚氨酯脲弹性体(PUU)性能的影响,通过改变扩链系数探讨PUU的力学性能和耐溶剂性能的变化规律。
3) polyurethane
聚氨酯
1.
Durability of polyurethane adhesive in NaCl solution under load;
外力作用下聚氨酯胶粘剂在NaCl水溶液中的耐久性
2.
Analysis of Hydrogen Bondings in Polyurethane Urea Cured in Graded Temperature Field by FTIR;
梯度固化聚氨酯脲中氢键的红外光谱分析
3.
Preparation and application of the silicone-polyurethane copolymer;
有机硅/聚氨酯共聚物的制备研究与应用
4) PU
聚氨酯
1.
Study of preparation and properties on epoxy resin adhesive modified by PU;
聚氨酯改性环氧树脂胶粘剂的制备及性能研究
2.
Preparation and Characterization of EP/PU IPN with Continuous Graded Structure;
环氧/聚氨酯IPN连续梯度材料的制备和表征
3.
Preparation of PTFE/PU composite membrane;
膨体聚四氟乙烯微孔-聚氨酯复合膜的制备
5) Polyurethane
聚氨脂
1.
This article introduces the technology of trimming the aditus department of the thin-wall barrel-type piece based on the principles of transversal truncation about the polyurethane rubber.
基于聚氨脂橡胶横向截切原理介绍了薄壁筒形件口部修边的工艺方法,根据其剪切机理研制了修边模具,叙述了模具结构及主要工作零件的设计。
2.
Adopting polyurethane and wooden bolt to ahead strengthen three soft seam wall can efficiently control coal wall fall at combined face,speed up the mining speed.
利用聚氨脂等锚固剂加木锚杆 ,对三软煤层煤壁进行超前加固 ,有效地控制了综采工作面的煤壁片冒问题 ,加快了综采推进度 ,取得了较好的技术经济效
3.
The details were described in the developrnent of magnetic materials and foamed polyurethane plastics through determination of the geometry of dispersed phase in the materials by image analysis.
文中阐述了图像分析技术在新材料研制中的应用,具体介绍在塑料磁体、聚氨脂泡沫塑料研制中利用该技术对多相体系中分散相形态进行的定量测量。
6) polyurethane adhesive
聚氨酯胶
1.
The polyurethane adhesive has good toughness and adherence, and better wear-resistance than steel in liquid medium, so it could be grouted under fluid state and solidified under normal temperature and used for strengthening hydraulic structures conveniently.
聚氨酯胶在液体介质中耐磨性能优于钢铁 ,韧性好 ,粘接力强 ,具有可液态灌注、涂刷方便、常温固化和易于施工的特点 ,介绍其在水工建筑物上的应用。
参考词条
补充资料：固体聚氨酯弹性体
分子式：
CAS号：
性质：固体聚氨酯弹性体是浇注聚氨酯弹性体、热塑性聚氨酯弹性体、混炼型聚氨酯及聚氨酯胶片的总称。广泛用于汽车工业、机械工业制作导轮、轧辊、耐磨元件、垫片、胶管等制件。
CAS号：
性质：固体聚氨酯弹性体是浇注聚氨酯弹性体、热塑性聚氨酯弹性体、混炼型聚氨酯及聚氨酯胶片的总称。广泛用于汽车工业、机械工业制作导轮、轧辊、耐磨元件、垫片、胶管等制件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。