1) low foaming PS
![点击朗读](/dictall/images/read.gif)
低发泡PS
1.
The rheological behavior, apparent density and pore structure of low foaming PS were studied in this paper.
结果表明 :低发泡PS熔体是切力变稀的非牛顿流体 ,熔体中成核剂和气体的共同作用 ,使低发泡PS熔体的表观粘度在 1 80℃下比PS熔体的低 ,而在 1 90℃及 2 0 0℃下比PS熔体的高 ;低发泡PS熔体的粘流活化能比PS熔体的低 ;低发泡PS熔体的非牛顿指数比PS熔体的大 ,即低发泡PS熔体偏离牛顿流体的程度小 ;在较低的成型温度下 ,低发泡PS制品的表观密度较低 ,泡孔尺寸分布均匀 ,性能较
2) PS/SCCO_2
![点击朗读](/dictall/images/read.gif)
PS/SCCO_2发泡体系
3) low-foamed
![点击朗读](/dictall/images/read.gif)
低发泡
1.
It introduced the extrusion moulding technology of pvc surface-crusting low-foamed wided door sheet.
介绍了PVC结皮低发泡宽幅门板的挤出成型技术。
2.
The RM-200 torque-rheometer was used to study the rheological properties of the rigid low-foamed poly(vinyl chloride)(PVC) in this paper.
用RM-200转矩流变仪对不同配方的硬质低发泡聚氯乙烯(PVC)的流变性能进行了分析。
3.
The rigid low-foamed surface crusting PVC (polyvinyl chloride), reputed as composite wood, was developping speedly in the world meterials market in the last few years.
硬质低发泡结皮聚氯乙烯(PVC),有“合成木材”的美称,近几年来在世界材料市场中发展迅速。
4) low foaming
![点击朗读](/dictall/images/read.gif)
低发泡
1.
In the process of PVC low foaming solid sheet extrusion molding,it is critical to control the folw and foaming of the molten polymer.
在PVC低发泡实心板挤出成型中,控制聚合物熔体的流动和发泡是保证产品质量的关键,重点介绍了生产工艺和原理,并分析了生产中的技术要点,提出了解决的办法。
5) Low-foamed UPVC
![点击朗读](/dictall/images/read.gif)
低发泡UPVC
1.
Influence of Rare-earth Stabilizer and Organic Acid on Foaming System for Non-toxic Low-foamed UPVC;
稀土稳定剂及有机酸对无毒低发泡UPVC发泡体系的影响
6) Low Foamed
![点击朗读](/dictall/images/read.gif)
低发泡
1.
The effects of the ingredients in the formulation on the low foamed R PVC extrusion stability were studied.
研究了主要配方组分对硬质PVC低发泡挤出过程稳定性的影响,设计并筛选出制品密度ρ=08gcm-3的实用硬PVC低发泡挤出制品配方。
2.
Low foamed PP was prepared through injection molding technology.
![点击朗读](/dictall/images/read.gif)
采用注塑成型工艺制备了聚丙烯(PP)低发泡材料,分别探讨了发泡剂、交联剂用量及填料对PP发泡材料拉伸强度、缺口冲击强度、硬度、密度及热变形温度等性能的影响,并用扫描电子显微镜(SEM)对泡孔结构进行了观察。
补充资料:低泡洗涤剂
分子式:
CAS号:
性质: 水溶液中的表面活性剂在力的作用下产生较低的泡沫。在用洗衣机洗涤时,泡沫过多容易产生溢液现象,影响洗涤效果。因此,洗衣机专用洗涤剂多为低泡洗涤剂。低泡洗涤剂的泡沫控制在(罗式泡沫测定仪)40~100mm,一般用非离子表面活性剂聚氧乙烯(7)醚,或聚氧乙烯(10)醚以及脂肪醇硫酸钠作为组分。
CAS号:
性质: 水溶液中的表面活性剂在力的作用下产生较低的泡沫。在用洗衣机洗涤时,泡沫过多容易产生溢液现象,影响洗涤效果。因此,洗衣机专用洗涤剂多为低泡洗涤剂。低泡洗涤剂的泡沫控制在(罗式泡沫测定仪)40~100mm,一般用非离子表面活性剂聚氧乙烯(7)醚,或聚氧乙烯(10)醚以及脂肪醇硫酸钠作为组分。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条