1) isothermal quenching
等淬
1.
Tests with different isothermal temperatures and small batch trial production showed that by adopting the process of austenitizing at 900+10C for 1 hour and then isothermal quenching at 370+10C for 1 hour, the ADI gears with tensile strength higher than 950 MPa, elongation more than 5% can be obtained.
通过等淬温度波动试验和小批量试制证明,球铁齿轮采用900±10℃保温1 h奥氏体化,然后370±10℃等温1 h的工艺,抗拉强度可超过950 MPa,伸长率超过5%,完全达到设计指标要求。
2) ADI
等淬球铁
1.
Effect of Isothermally-Quenching Temperature on Retained Austenite and Mechanical Properties of ADI;
等淬温度对等淬球铁中残余奥氏体及其力学性能的影响
2.
From the data listed in EN1564 standard the corresponding math formulas showing relationships between the tensile strength and other mechanical properties of normal ADI were derived.
根据欧洲等淬球铁标准EN1564的数据,建立各力学性能之间的数学模型。
3) isothermally-quenching temperature
等淬温度
4) isothermal quenching
等淬处理
5) austempering temperature
等淬时间
1.
The effects of alloy element molybdenum, copper as well as austempering temperature and time variables on the microstructures and mechanical properties of centrifugal austempered ductile iron(ADI) pipes produced by salt have been systematically studied.
比较系统地研究了合金元素Ｃｕ、Ｍｏ和等淬时间及温度对离心奥氏体／贝氏体球墨铸铁管组织与性能的影响，找出了合金元素Ｃｕ、Ｍｏ对离心奥氏体／贝氏体球墨铸铁管的影响规律，确定了适宜的热处理工艺参数，并在实验室生产出性能良好的离心奥氏体／贝氏体球墨铸铁管。
6) ADI
等淬奥-贝球铁
参考词条
补充资料：35CrNi3MoV钢等温淬火组织
35CrNi3MoV钢等温淬火组织
35CrNi3MoV钢等温淬火组织马氏体(绿)+见氏体(棕)残余奥氏体(浅黄)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。