1) modulus of resilience
回弹模量
1.
The test results show that the compression modulus,modulus of resilience,cohesion and angle of internal friction of the compaction loess increase with the compactive effort.
试验结果表明:压实黄土的压缩模量、回弹模量、粘聚力及内摩擦角随击实功的增大而增大;强夯压实黄土的干密度普遍较击实黄土低,但其压缩模量和强度较室内击实黄土明显地大。
2.
So this paper analyzes the current problems of design parameters of highway base and pavement and aiming at the different areas puts forward improving proposals concerning the modulus of resilience of earth subgrade and the material design parameters of the surface course and base course.
分析了现行规范公路设计参数存在的问题,针对不同地区,提出了公路土基回弹模量、基层与面层设计参数的改进方法,为公路设计提供依据,从而保证设计的可靠性和公路的正常营运。
3.
The gradation of the appointed limestone adopted the standard gradation,and the experiment of the confining compression strength,the modulus of resilience and the shrink deformation was made by using different cement quantity in the different ages in this paper.
对指定的石灰岩碎石采用规范建议的级配,采用不同的水泥用量,在不同的龄期进行无侧限抗压强度、回弹模量、干缩变形等试验,并对试验结果进行分析,确定一个比较合理的水泥用量范围。
2) resilient modulus
回弹模量
1.
Research on resilient modulus of soft foundation dealt with blasting;
爆炸法处理软土地基的回弹模量研究
2.
Stress-dependent characteristics and prediction model of the resilient modulus of subgrade soils;
路基土回弹模量应力依赖性分析及预估模型
3.
Considerations on resilient modulus of earth foundation;
在工程实践中对土基回弹模量的思考
3) rebound modulus
回弹模量
1.
The comprehensive evaluation of rebound modulus nonlinear of sand stone base material
砂砾石基层材料回弹模量非线性的综合评判
2.
According to the statistics and analysis of a lot of actually measured deflection of the whole layer of materials of Hu-Fu-Huang Highway subgrade and pavement in Taicang City the paper calculates the equivalent rebound modulus of road bed top and the rebound modulus of the whole layer of materials so as to guide the design and appraise whether the designed deflection is reasonable or not.
根据对太仓市沪-浮-璜公路路基路面整层材料的大量实测弯沉的统计与分析,推算出路床顶当量回弹模量及整层材料回弹模量,从而指导设计并鉴定设计弯沉是否合理,通过对实测弯沉的分析使设计弯沉更加合理。
4) resilience modulus
回弹模量
1.
Subgrade resilience modulus measuring by portable falling weight deflectometer(PFWD);
应用便携式落锤弯沉仪测定路基回弹模量
2.
Through analyzing the relations between unloading ratio and resilience modulus, a proper engineering measure is taken,that will quaran.
通过对试验数据的进一步分析整理,采用侧向应力松弛法以及卸荷比与回弹模量的关系规律来研究基坑开挖回弹的规律,以便在地铁车站超深基坑开挖中采用合适的工程措施,从而保证工程的安全,并为其他工程应用提供借鉴和参考。
5) elastic modulus
回弹模量
1.
The splitting strength, elastic modulus, shrinkage and engineering economy of them are also tested, then the mixing proportions are further optimized.
对不掺和掺用外加剂或水泥的二灰稳定尾矿料的无侧限抗压强度进行测试 ,从中选出较优的配合比 ,再从较优配合比混合料的劈裂强度、抗压回弹模量、干缩性和工程经济性等角度进一步优选出二灰掺量、石灰与粉煤灰比例以及外加剂种类与掺量 ,进而将其用作连云港市旧路面 1km试验路段基层材料加以验证 ,以便推广应用。
2.
Abatract:For the big dimension of sand-gravel,the test method of elastic modulus in test methods of soils for highway engi-neering cann’t be applied to sand-gravel.
针对砂砾石颗粒粒径大、与《公路土工试验规程》回弹模量试验不适用的问题,在试验仪器和方法上作了一定的改进,以使测试的砂砾石材料回弹模量更接近实际。
6) modulus of elasticity (E0)
回弹模量E_0
补充资料:双硬度高回弹模塑泡沫塑料
分子式:
CAS号:
性质:一种高回弹泡沫塑料,同一制品具有两种硬度。生产方法有:①聚合物多元醇变量法,调节配方中的聚合物多元醇用量,以双混合头分两次浇注一次模塑成型;②异氰酸酯变量法,异氰酸酯组分使用改性MDI,发泡时瞬间改变异氰酸酯指数,两次浇注一次模塑成型。主要用于汽车座垫。
CAS号:
性质:一种高回弹泡沫塑料,同一制品具有两种硬度。生产方法有:①聚合物多元醇变量法,调节配方中的聚合物多元醇用量,以双混合头分两次浇注一次模塑成型;②异氰酸酯变量法,异氰酸酯组分使用改性MDI,发泡时瞬间改变异氰酸酯指数,两次浇注一次模塑成型。主要用于汽车座垫。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条