1) gas-melt interface
气熔界面
1.
When injecting gas into polymer melt in extrusion from a single orifice, it is indicated that gas-melt interface formed showed three kinds of shapes: ring, round-ring, and round.
气体经单个喷嘴进入挤出机中熔体时所形成的气熔界面其形态有环状、团环状和团状三种 ,最常见的是团状。
2.
The diffusion of gas penetration in polymer melt during gas-assisted injection molding and gas-melt interface were studied.
以FM全新卡车顶篷把手为典型件进行气辅成型实验研究,研究了气体保压压力、熔体温度、气体保压时间、气体注射延迟时间四个重要工艺参数对气熔界面的影响规律。
2) melt/gas interface
熔体/气体界面
3) melting interface
重熔界面
1.
The difference in substance above the melting interface is the reason of fluctuation of the velocity interfaces above 8km.
地震界面起伏的特点与根据地表地质资料勾画的重熔界面波动形态有极好的吻合性,显示地震资料能够准确地揭示重熔界面位置和形态。
4) melting interface
熔融界面
5) gas-liquid interface
气液界面
1.
On the basis of introducing the structure,performance index and test principle of the RMT,this paper describes its favorable application effects in dividing the gas-liquid interface through which fluid in- terface in the subsurface reservoir can be monitored and evaluated regularly thus to determine the.
而本文在介绍仪器结构、性能指标与测试原理的基础上,通过对实际测井资料进行综合分析,阐述了RMT在划分气液界面具有很好的应用效果,能够实现地下储层流体界面的定期监测与评价,从而确定射孔的有效性。
2.
The behaviors of gas-liquid interface associate with two-phase annular flow regime in horizontal micro tubes are investigated with linear stability analysis.
本文以水平微圆管内气液两相环状流气液界面为研究对象,通过分析重力、表面张力和界面剪切力对环状流液膜厚度的影响,重点考虑Rayleigh不稳定性对气液界面的依存关系,得到了不同管径和气核直径变化时不稳定性的变化规律,并分析拟合了最危险波长和气核直径的关联式,为后续建立高热流密度条件下微通道内强化传热理论模型奠定基础。
3.
The composition and optical characte ri stics of a self-made,real-time and microscopic dual wavelength holographic in terferometer for visualizing the concentration profiles on gas-liquid interface were reported in this paper.
利用该系统测量了甲醇 -乙醇 - CO2 等三元物系气液界面处液相侧的浓度场 ,得到了清晰的两个实时全息干涉条纹图 ,清楚地观察到了气液两相界面存在的湍动现象 ,从而验证了该系统的可靠性。
6) Gas-water interface
气水界面
1.
It is necessary to accurately monitor location of gas-water interface in annular between casing and test tube for pressurized sealing property test of cavity of salt dome gas storage well in Jintan,Jiangsu,so DDL-III logging system and 111/16 inch.
江苏金坛盐穴地下储气库井腔体试压密封检测需要精确监测套管和测试管柱之间的环形空间中气水界面位置的变化情况,为此选用了哈里伯顿公司生产的DDL-Ⅲ数控测井系统和直径111/16in的伽马中子测井仪以及配套的井口密封设备。
2.
A lot of data including MDT, NMR (nuclear magnetic resonance) measurement points, cross-dipole acoustic image are used to identify the fluid nature, describe the distribution law of fluids, and determine the gas-water interface of gas reservoirs.
利用高精度三维地震资料对松辽盆地南部长岭断陷火山岩分布及其火山喷发期次进行描述,并落实火山岩顶面构造特征和火山岩气藏圈闭类型;利用元素俘获测井和微电阻率扫描成像测井技术对该火山岩岩性进行标定、识别,并定性、定量评价火山岩储层裂缝发育程度;利用MDT、核磁点测、交叉偶极声波成像等资料对流体性质进行识别,描述了流体分布规律,确定气藏的气水界面;利用核磁、密度测井联合求取有效孔隙度;利用核磁T2谱转换毛管压力求取含气饱和度等,在此基础上计算长岭1号气田火山岩气藏探明储量。
补充资料：液气界面
液气界面
液体与气体的接触分界处。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条