1) pillar
[英]['pɪlə(r)] [美]['pɪlɚ]
点柱
1.
Non-pillar continuous mining(NPCM) is briefly introduced in an underground metal mine as an example of a new continuous mining method.
通过无间柱连续采矿凿岩硐室点柱的强度和应力的计算,建立可靠性分析的隐式极限状态方程,然后运用基于MCS-ANN-FEM的改进的有限元Monte-Carlo分析方法,对点柱进行全面的可靠性分析和设计。
2.
We propose a new mining method: point-pillar paste filling based on the combined advantages of room-pillar method and backfilling.
将房柱式开采和膏体充填开采的优点相融合,提出了点柱式膏体充填采煤方法。
2) beam-column joints
梁柱节点
1.
Analysis of ratio of axial compressive force to resisting shear strength of reinforced concrete beam-column joints;
轴压比对梁柱节点抗剪强度影响的分析
2.
Research into fracture of steel frame beam-column joints;
钢框架梁柱节点断裂研究
3.
The influence factor to the ultimate bearing capacity of concrete beam-column joints with placed ducts under axes-pressure;
轴心受压状态下有孔道混凝土梁柱节点的承载力的影响因素
3) beam-column connection
梁柱节点
1.
The seismic resistant design method of reinforced concrete beam-column connections based on compression strut and softened truss models;
基于压杆和软化桁架模型的钢砼梁柱节点抗震设计方法
2.
Therefore, the study on the behavior of the beam-column connections to improve ductility as well as to prevent brittle failure was carried out in this research.
钢框架梁柱节点的连接性能研究引起国内外的广泛关注,尤其是通过改善节点的变形性能从而提高结构的延性已成为钢结构研究的焦点。
3.
Three-dimensional finite element method was employed toinvestigate the effect of the strength mismatching of the groove heamflange welds on the fracture toughness requirements in terms of crack tipopening displacement in welded beam-column connections, which pro-vides valuable suggestions for the design of beam-column connections andselecting welding materials.
通过三维弹塑性有限元分析 ,采用裂纹张开位移CTOD作为断裂韧度参量 ,研究了梁柱节点梁翼缘焊缝强度匹配对其断裂韧度要求的影响 ,从而为梁柱节点的设计以及焊接材料的选择提供一定的依据。
4) Artifical pillar
人工点柱
5) beam-column joint
梁柱节点
1.
Load capacity and stiffness of beam-column joint strengthened by plate rings with irregularly arranged double level beams;
双层不规则布置梁加强环式梁柱节点承载力及刚度
2.
Studies on shear performance of reinforced concrete beam-column joint strengthened by a new method with two-dimensional finite element analysis;
节点加强后钢筋混凝土梁柱节点剪切性能的二维有限元分析
3.
Studies on failure mechanism of reinforced concrete beam-column joints using three-dimensional finite element method;
应用三维有限元法探讨RC梁柱节点的破坏机理
6) column-slab joint
板柱节点
1.
The column-slab joint keeps the concrete flat plate continuous and set a pallet by increasing the thickness of the slab partially near the column capital,in which steel hoops are placed.
通过对新型钢管混凝土板柱节点抗冲切性能的试验结果进行分析,借鉴混凝土结构设计规范,提出了该节点抗冲切的计算公式和设计建议。
补充资料：天柱山天柱峰
天柱山天柱峰
天柱峰又称为皖伯尖，万山尖。《道书》称为司命真人发祥所都，海拔1488.4米，孤立晴宵，顶天立地，石骨嶙峋，峭立如柱。五指、莲花、天池、含珠、飞来、月华诸峰拱卫左右，奇松、怪石、云海、佛光、各领风骚。李白《江上望皖公山》诗云：“奇峰出奇云，秀水含秀气。”白居易《题天柱峰》诗云：“天柱一峰擎日月，洞门千仞锁云雷。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。