1) solid content
含固量
1.
Experimental study on preparation of MAP from phosphoric acid with different solid content;
不同含固量磷酸制备磷酸一铵的实验研究
2.
The method for determining the solid content of textile finishing agents with microwave oven were discussed.
探讨了用微波炉测定纺织品整理剂含固量的方法和工艺,实践证明:该法加热速度快,热效率高,加热均匀,节能,清洁,操作简便,特别适合实验室小批量的含固量测定。
2) solid loading
固相含量
1.
Gelcasting was applied to shaping of titanium alloy(Ti6Al4V) powders and the preparation of titanium alloy powder’s slurries with high solid loading was investigated.
将凝胶注模工艺应用于金属Ti6Al4V合金粉末的成形,研究了高固相含量的Ti6Al4V合金粉末的料浆的制备,比较了金属浆料与陶瓷浆料的不同。
2.
Thedependence of AT suspension rheological properties on various solid loading and different dispersants wasstudied,and the influence of monomer(AM) and cross-linking agent(MBAM) content on properties of ATbodies was also discussed.
研究了分散剂和固相含量对钛酸铝浆料流变性的影响,并探讨了单体和交联剂用量对钛酸铝坯体性能的影响规律。
3.
The preparation of titanium alloy powder's slurries with high solid loading was investigated.
将凝胶注模工艺应用于金属Ti及Ti-6Al-4V合金粉末的坯体成形,研究了高固相含量的Ti粉和Ti-6Al-4V合金粉末的料浆的制备。
3) high solid content
高固含量
1.
Influence factors on preparation of aqueous polyurethane emulsion with high solid content;
制备高固含量水性聚氨酯乳液的影响因素
2.
Synthesis of waterborne polyurethane adhesive for shoes with high solid content;
高固含量鞋用水性聚氨酯胶粘剂的合成
3.
Random-design for the technology of emulsion polymerization with high solid content and the SAS analysis for the resultant data;
高固含量乳液制备工艺的优化及实验结果的SAS分析
4) solid loading
固含量
1.
The influence of dispersants on the rheologica l behaviors and solid loading on properties of green and sintered bodies were st udied, and the role of dispersants and solid loading on properties of slurry and ceramics were also studied.
选用4种分散剂(三乙醇胺,磷酸三丁酯,蓖麻油和三油酸甘油酯),通过对分散剂的用量、固含量对浆料流变性能、流延生坯及烧结体性能的研究。
5) 100% solid-content
100%固含量
1.
The basic compositions and properties of 100% solid-content elastic polyurethane coatings, elastic polyurea coatings and rigid polyurethane coatings are reviewed.
综述100%固含量弹性聚氨酯涂料、100%固含量弹性聚脲涂料和100%固含量刚性聚氨酯涂料的基本组成和性能,全面介绍它们的应用范围和应用条件,指出进行正确的涂料配方设计和选择正确的施工体系类型的重要性。
6) solids loading
固相含量
1.
The influences of solids loading on the rheological properties used for aqueous gel-casting were studied, and also in this paper the microstructures, densities, and strengths of yttria-stabilized zirconia were investigated.
主要研究料浆固相含量对氧化钇稳定氧化锆料浆流变性质,以及YSZ的微结构、密度和强度的影响规律,并分析讨论其原因。
补充资料：茶叶含梗量检验
茶叶含梗量检验
stalk contents inspection of tea
茶叶含梗t检验(stalk eontents inspee-tion of tea)茶叶检验之一。对茶叶中茶梗数量的检测措施。茶梗是茶叶加工后残存f成品茶中的茎、梗部分物体。主要是采摘粗放或精制过程中拣剔不净所致。茶梗在各类茶中都有存在.人小、长短、色泽各异，在一定程度上影响茶叶的外形和内质。日本、埃及等国都列为应施检验项目。对于茶梗含最，茶类不同，要求也不同。一般红绿茶对照贸易标准样茶或成交样茶检验其含梗量，出口的压制茶类可含有茶梗，含梗量指标规定米砖6%、圆茶4一6%、滇沱茶0.5%、川沱茶3%，其检验方法因茶类不同而异。 红绿茶含梗量检验将待检茶叶通过分样器缩分、精确称取茶叶100克，均匀分布于白色瓷盘，用镊子逐一拣出茶梗，合并一起称重，计算(l’分率。 压制茶含梗量检验锯取试样一半《必要时用整块)，放入燕笼内，汽蒸1一3小时，使梗叶易于分离时取出，将梗拣出，在烘箱内按茶叶水分检验法烘干称重，计算茶叶含梗的百分率。(严鸿德)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条