1)  flow regimes
流型分区
2)  flow pattern
流型
1.
Experimental study on flow patterns of heavy oil-water two-phase flow in horizontal pipes;
稠油-水两相水平管流流型实验研究
2.
Characteristics of oil-gas-water three-phase flow pattern in horizontal and slightly inclined pipes;
水平及微倾斜管内油气水三相流流型特性
3.
The investigation of gas-liquid two-phase flow patterns on the condition of continuous gas-lift;
连续气举条件下气液两相流流型的研究
3)  flow patterns
流型
1.
Application of chaotic recurrence analysis for identification of oil/water two-phase flow patterns;
混沌递归分析在油水两相流流型识别中的应用
2.
Flow Boiling Heat Transfer and Flow Patterns in Three-Dimensional Micro-finned Helically Coiled Tube;
三维微肋螺旋管内流动沸腾传热与流型
3.
A new computation method of Kolmogorov entropy based on the concept of general entropy was used to extract the complexity of time series in order to characterize the oil/water two phase flow patterns,and was proved reliable by an example of the Mackey-Glass Equation.
采用一种基于广义熵概念的Kolmogorov熵计算方法来提取时间序列的复杂性特征 ,进而对油水两相流流型进行表征 ,用Mackey Glass方程作算例验证了该复杂性特征提取方法的可靠性 。
4)  flow regime
流型
1.
Characterization of flow regimes of air-water two-phase flow in horizontal pipe using chaotic analysis;
水平管内空气-水两相流流型的混沌特征
2.
Development and application of on-line identification system for flow regime of gas-liquid two-phase flow;
气液两相流型在线识别系统的开发和应用
3.
A new method for identification of flow regime of gas-solid fluidized bed using fractal and fuzzy recognition is presented.
提出一种基于分形和模糊技术的气固流化床流型辨识的新方法 ,将分形技术应用在气固流化床压力波动信号的分析中 ,提取出信号特征值Hurst指数 ,同时结合模糊识别 ,建立模糊识别函数 ,由此来区分气固流化床的不同流型。
5)  flow type
流型
1.
The influence of flow type in blast furnace cooling system to USF;
高炉冷却水流型对USF的影响
2.
In order to validate the concept of two generations unsteady flow type-unsteady natural fow type(UNFT)and unsteady cooperative flow type(UCFT)-in axial flow compressor proposed by authors, numerical simulation and experiments are done.
针对作者提出的轴流压气机非定常两代流型———非定常自然流型(UNFT)和非定常耦合流型(UCFT)———概念,本文进行了数值模拟和试验两个方面的验证。
6)  regime
流型
1.
A novel method for the on-line identification of flow regimes of gas-liquid two-phase flowsystem based on the wavelets transform is presented.
本文提出了一种基于小波分析进行气液两相流流型模糊辨识的新方法。
2.
The concept of the Weisman s regime transition zone is applied to the investigation of oil-gas-water three-phase slug flow pattern.
将Weisman流型转化过渡区的概念应用到油 气 水三相弹状流流型的研究中 ,量化了弹状流转化过渡区的边界 。
参考词条
补充资料:GLZ型振动流化床

 

工作原理:
固态原料在流化床内的移动主要依靠振动来进行。 振动流化床可用于干燥或冷却工艺,适用于颗粒粗大或颗粒不规则而不易流化的产品,或因为要使颗粒保持完整而要求较低流化速度的产品及易于粘结、对温度敏感的产品。使用这种设备时颗粒层一般不超过200毫米的厚度,因此每单位面积中的颗粒滞留时间比非振动型床的要少得多,在非振动型流化床中颗粒层的厚度可高达1500毫米。 振动流化床有立式多层和卧式两种,立式多层振动流化床干燥机具有热效率高,占地面积小等优点,并可以对食品实现干燥,焙烤在同一设备完成。
 

性能特点:
1.节能:较同类型干燥设备节省热能30%,节省电能40%。
2.连续:物料从进料口连续加入,出料口连续排出。
3.高效:振动加速了传热传质过程,因而干燥时间短、效率高。
4.用途广:物料流速可在一定范围内无级调整,从而调整物料在机内停留时间,适合多种物料干燥。
5.噪音低,隔振性能好,可浮放在地面,坚固耐用。
6.可安装自动给料装置,代替喂料装置。
  

                      
型号 参数振槽面积(㎡)外型尺寸(长×宽×高)脱水能力(kg/h)进风温度(℃)重量(kg)装机功率(kw)占地面积(㎡)
GLZ3×300.3×3.03500×1068×130030-5060-30012000.89
GLZ3×450.3×4.55000×1070×131045-7560-30015000.812
GLZ4×450.4×4.55000×1170×131070-11060-30018000.812
GLZ6×450.6×4.55000×1364×20090-15060-30020002.215
GLZ6×600.6×6.06500×1364×2000120-20060-30027003.018
GLZ6×750.6×7.58000×1364×2100150-25060-30031003.019
GLZ9×600.9×6.06500×1850×2100180-30060-30035004.420
GLZ9×750.9×7.58000×2100×2100225-37560-30042007.424
GLZ12×751.2×7.58000×2400×2700300-50060-30052007.432
GLZ15×751.5×7.58000×2800×2900375-62560-30064007.436

                    

                    

立式振动多层流化床技术参数:


                    
                      
型    号孔板面积
(㎡)
电机功率
(KW)
整机重量
(kg)
外型尺寸
(mm)
GLZL-φ100.6×50.75×28001480×1096×2160
GLZL-φ120.93×50.75×28681640×1270×2110
GLZL-φ161.6×61.5×216002150×1700×2440
GLZL-φ202.6×62.4×224022410×2080×2525
GLZL-φ254.2×63.7×243103200×2600×3100

                    

                    

立式振动多层流化床实用例:  


                    
                      
物料名称粒度
(mm)
初含水
(%)
终含水
(%)
风温
℃)
产量
(kg)
机  型
1-25.60.5120600GLZL-φ10
虾饵料φ1×525131801100GLZL-φ16
味精0.320.05120750GLZL-φ10
生物化肥1134120900GLZL-φ20
有机药粉0.153314120100GLZL-φ10
调味品0.55.50.01120360GLZL-φ10
添加剂0.1516.21.4120200GLZL-φ10
说明:补充资料仅用于学习参考,请勿用于其它任何用途。