1) double torsion
双扭矩
1.
In this paper, the effects of water environment and cyclic loading on the KI-V characteristics were studied by the crack growth tests using double torsion (DT) method under static and cyclic loading in both environments of air and water for the bio-ceramics of glass ceramics, mica glass ceramics, alumina and zirconia.
采用破坏力学中的双扭矩实验法,研究了玻璃陶瓷、云母陶瓷、氧化铝陶瓷、氧化铝陶瓷材料分别在大气、水环境中的静负荷和循环负荷下的裂纹扩展特性,阐明了水环境和循环负荷对材料裂纹扩展特性（K1-V特性）的影响。
2) torsion-bending bimoment
扭弯双力矩
3) torque
[英][tɔ:k] [美][tɔrk]
扭矩
1.
Influence of Twin-screw Extruder Screw Element Type on the Torque and Pressures during Extrusion;
双螺杆挤压机螺杆元件类型对扭矩和压力的影响
2.
The design of the explosion-proof torque recorder based on snap-in chip;
基于嵌入式芯片的防爆扭矩记录仪的设计
3.
New model for forecasting drag and torque in Extended Reach Well.;
大位移井摩阻/扭矩预测计算新模型
4) torque moment
扭矩
1.
Analysis of torque moment in friction stir welding;
搅拌摩擦焊中的扭矩分析
2.
Tests of measuring torque moment verified that circuits with four strain gauges could get rid of the influence exerted by the bending moment.
介绍了三种测应变的线路,通过实验证实,在测扭矩时,用4片电阻应变片构成的线路,可以排除弯矩的影响。
3.
It is a widely existent phenomenon that the working torque moment of theConform machine main shaft undulates periodically.
CONFORM机主轴工作扭矩周期性波动是一种普遍存在的现象。
5) twisting moment
扭矩
1.
Based on the disassembling and examining and analyzing of the broken shaft, the over twisting moment or over torque trouble caused by blocking steel and retreating steel is determined and the improving proposals are put forward.
针对一起生产企业和设备生产厂家有争议的SWC440万向轴断轴事故进行了检测分析,通过对断轴进行解体、检测、分析认定,由于“卡钢”和“退钢”造成扭矩或转矩过大形成事故。
2.
By computing the twisting moment of one cap beam by traditional and finite element method respectively,the differences between the two methods are got.
通过分析用常规计算方法和有限元算法对同一桥墩进行扭矩计算结果的巨大差异,得出了常规算法过于保守,不利于客观地评定盖梁的抗扭承载力,同时也说明了用空间梁单元,计算盖梁扭矩的合理性。
6) torsion
[英]['tɔ:ʃn] [美]['tɔrʃən]
扭矩
1.
Experiment on cylindrical helical spring in double direction realizing the test of torsion;
用双向扭转圆柱组合螺旋弹簧实现扭矩测试
2.
The application of finite element method in torsion calculating of deep hole drill is introduced.
用有限元法分析了钻头容屑槽单元的划分 ,列出了深孔钻头扭转时的应力、扭矩和刚度的计算公式 ,为应用计算机对钻头扭转的计算提供了理论依据。
补充资料：2,2-双氯甲基-三亚甲基-双[双(2-氯乙基)磷酸脂]
CAS：38051-10-4
分子式：C13H24Cl6O8P2
中文名称：2,2-双氯甲基-三亚甲基-双[双(2-氯乙基)磷酸脂]
英文名称：2,2- bis(chloromethyl)-trimethylene bis[bis(2-chloroethyl)phosphate]
phosphoric acid, 2,2-bis(chloromethyl)-1,3-propanediyl tetrakis(2-chloroethyl)
2,2-bis(chloromethyl)trimethylene bis(bis(2-chloroethyl)phosphate)
2,2-bis(chloromethyl)-1,3-propanediyltetrakis(2-chloroethyl)phosphate
分子式：C13H24Cl6O8P2
中文名称：2,2-双氯甲基-三亚甲基-双[双(2-氯乙基)磷酸脂]
英文名称：2,2- bis(chloromethyl)-trimethylene bis[bis(2-chloroethyl)phosphate]
phosphoric acid, 2,2-bis(chloromethyl)-1,3-propanediyl tetrakis(2-chloroethyl)
2,2-bis(chloromethyl)trimethylene bis(bis(2-chloroethyl)phosphate)
2,2-bis(chloromethyl)-1,3-propanediyltetrakis(2-chloroethyl)phosphate
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条