1) single-screw extruder
单螺杆挤压机
1.
This paper introduced application of intelligent computer control system in single-screw extruder.
应用结果表明,该系统满足设备要求,为单螺杆挤压机的研制提供了参考依据。
2) single-screw,single-stage extruders
单螺杆单段挤压机
3) screw extruder
螺杆挤压机
1.
This paper briefly introduces the work principle of singlescrew extruder and the develop trend of screw extruder control system.
简要介绍了单螺杆挤压机的构成和工作原理以及螺杆挤压机控制系统的发展趋势 。
2.
The reasons for wear and tear of the inlay sleeve of sleeve of P75\|24A screw extruder made in Japan were analyzed, and some measures to reduce wear and tear of the inlay sleeve were proposed.
分析了日本帝人公司生产的 P75 -2 4A螺杆挤压机套筒镶套磨损的原因是环结阻料或异常卡车 ,提出减少磨损的几条措施。
3.
This paper briefly discusses the history and principle of screw extruder.
简述了螺杆挤压机的历史、工作原理 ;分析比较了单螺杆和双螺杆挤压机的结构特点 。
4) Single screw extruding technique
单螺杆挤压技术
5) single screw extruder
单螺杆挤出机
1.
Experimental Study on Melting Process in Vibration Induced Single Screw Extruder;
振动诱导单螺杆挤出机熔融过程实验研究
2.
Numerical simulation of three-dimensional flow in single screw extruder by finite volume method;
单螺杆挤出机中三维流动有限体积数值模拟
3.
Based on finite difference method of numerical simulation, the semi-analytical method is proposed in the paper, which is adapted to compute the residence time distribution(RTD) of polymer melt in a single screw extruder, then the RTD under different operation parameters are obtained to characterized the mixing of polymer melt in the course of processing.
基于有限差分数值模拟技术,提出了计算非牛顿流体在单螺杆挤出机内停留时间分布的半解析方法,得到了不同操作参数下的停留时间分布,该分布可用来表征聚合物熔体在加工过程中的混合情况。
6) single-screw extruder
单螺杆挤出机
1.
Devolatilization of hydroxyl-terminated polydimethylsiloxane in single-screw extruder;
羟基聚硅氧烷在单螺杆挤出机中的脱挥
2.
With the foundation of the extrusion theories of a single-screw extruder,use for reference to research results of design theories of twin screw extruders in plastic industry and twin screw bulking extruders in food industry,to study design theories thoroughly of the TSPE is still need to know the particularity of .
在分析国内外双螺杆磨浆机设计和使用中存在问题的基础上,提出双螺杆磨浆机设计理论进一步研究的思路:以单螺杆挤出机挤出理论为基础,并借鉴塑料工业双螺杆挤出机和食品工业双螺杆挤压膨化机设计理论的研究成果;对双螺杆磨浆机设计理论的深入研究还需要明确双螺杆磨浆机的特殊性,研究制浆造纸材料的物理和机械性能。
3.
Based on the study on auger delivery theory of retarded adhesive mortar and the statistics of flow field in the single-screw extruder,the flow in extruder is simulated by using ANSYS software and taking a spiral length as the object.
应用ANSYS软件,在宾汉姆体缓凝砂浆螺旋输送理论和单螺杆挤出机中流场的数值研究基础上,以一个螺旋长度为对象,对挤出机中的流体进行了模拟。
补充资料：单螺杆挤压机
分子式：
CAS号：
性质：用单根螺杆将固体成形材料(主要为热塑性树脂）连续的熔融、压缩、挤压、成形的机械。是最常用的挤压机。由于结构简单，价格低廉，操作、方便而广泛应用于塑料加工工业中。
CAS号：
性质：用单根螺杆将固体成形材料(主要为热塑性树脂）连续的熔融、压缩、挤压、成形的机械。是最常用的挤压机。由于结构简单，价格低廉，操作、方便而广泛应用于塑料加工工业中。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条