1) micropore tubal firebrick
微孔管状耐火砖
3) firebrick
[英]['faiəbrik] [美]['faɪr,brɪk]
耐火砖
1.
In addition,the refractory firebrick were connected by male and female connection to ensure that the flue would not leak to the shell of the duct.
后经设计者反复调研考察,将衬里结构由原龟甲网加浇注料改造为耐火砖涂抹耐火浇注料,且在烟道顶部前后方向设计成三块"n"形耐火砖,耐火砖之间采用凸凹配合使烟气不能泄漏到烟道壳体。
2.
It determined replacing material for the cylinder and the heat-insulation hanging piece would be replaced by the home-made firebricks.
通过对烧蚀损坏的低热值燃气轮机单筒燃烧室检查、分析,找出了损坏原因,确定筒体替代材料,开发国产耐火砖替代隔热挂片,对燃烧室进行了修复,积累了检修经验和技术数据。
3.
This paper discusses how to improve expand section's lining of heavy_calibre and high_tempreture, the steel_fibre lining is improved to be the lining of firebrick and fireproof material, to avoide the lining drop and meet the needs of production.
阐述了如何将大口径高温膨胀节衬里由钢纤维双层衬里改为耐火砖加耐火浇注料结构,避免了衬里脱落,满足了生产需要。
4) refractory brick
耐火砖
1.
Damage to refractory brick at the feed end of rotary kiln and the measure;
损坏回转窑冷端耐火砖的主要原因及其对策
2.
Choosing and using refractory brick accurately to eliminate chrome harm to the environment;
合理选择和使用耐火砖消除铬对环境的危害
3.
Measures to prolong the lifespan of refractory brick in rotary kiln;
延长回转窑耐火砖使用寿命的几点举措
5) Fire brick
耐火砖
1.
The study shows that using kyanite as a major raw material, high-quality mullite insulating fire bricks can be produced by adjusting the structure of pores in the bricks, the grain sizes of kyanite and sintering temperature curves.
本文研究了利用蓝晶石制作轻质莫来石耐火砖的可行性,并探讨了轻质莫来石耐火砖的基本原理及在烧成过程中的物相变化。
2.
Combined with coke oven construction work in one coking factory from management and transportation of fire brick, mud management, mark rod setting and other aspects the preparation work is elaborated as well as the requirements before masonry construction of furnace body.
结合某焦化厂焦炉施工平面布置概况 ,从耐火砖的管理、运输、泥浆的管理、砌砖控制线和标杆的设置等方面 ,阐述了焦炉的施工准备措施 ,提出了炉体砌筑前的必备条
3.
In this article analyed theoretically are the two types of fire brick dies with complicated force and external shape.
对外形和受力都比较复杂的两种耐火砖模具的强度进行研究。
6) chromium firebrick
铬耐火砖
补充资料：耐火砖加工厂
耐火砖加工厂
processing plant of refractory brick
naihuozhuon Jiogongehang耐火砖加工厂(proeessing plant of refracto-ry brick)进行耐火砖的切割、研磨、修整加工和预装配等工作的小型专业工厂。按其生产规模和加工能力，分为简易耐火砖加工厂和组合砖加工厂两种。前者一般设在筑炉现场，厂房为装配式或固定式临时建筑，只能对耐火砖进行磨、切等简单的加工处理。后者除进行耐火砖的一般加工外，主要用于组合砖的加工和预组装，其厂房为钢结构或混合结构的正式厂房，由装有砖加工机械的主跨和配置画线工作台、木工机械等的副跨组成，并附设存放耐火砖的工作棚。厂房可不设在施工现场。 简易耐火砖加工厂的设备，主要有磨砖机、切砖机、验砖平板(由铸铁制造)、预砌筑平台(或地坪)、通风除尘设施等.磨砖机和切砖机的数量根据加工砖的规模确定。厂房面积根据设备安全操作所需面积，辅助设备工作面积，临时存放耐火砖所需面积和运输通 On心道面积之和取值。用于一般冶金炉筑炉工程的简易耐火砖加工厂，也可按每台砖加工机械需占15mZ估算其总面积;用于高炉砌筑工程的，则可按每台砖加工机械需占3om，估算。组合砖加工厂的设备主要有切砖机、磨砖机和曲面铣床等，设备规格较大，自动化程度和加工效率较高，可进行湿切、湿磨和湿铣，进刀量均可自动控制，能进行各种异型砖和任意斜面、曲面的加工。此外，还有桥式起重机和电葫芦等起重运输设备.电锯、压刨等木工机械，干燥炉、角向磨光机等辅助设备以及袋式除尘器等。厂房面积主跨约为l000m，，除布置砖加工机械外，尚留有一部分预组装场地，副跨约为50om2。厂房外设有存放耐火砖的工作棚，约为500m2。 (王玉珍)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条