1) antisplashing
抗飞溅
1.
has developed an antisplashing oiling agent, TF-702, for terylene DTY, the splashing of oiling agent is effectively prevented by adding lower-viscosity oil to improve products permeability, joining surfactant to reduce surface tension of oiling agent, hence its affinity for fibre is improved.
浙江传化股份有限公司研制的抗飞溅涤纶DTY油剂TF-702,通过在油剂中加入粘度较低的油改善产品的渗透性、加入表面活性剂降低油剂的表面张力,提高了纤维的亲和力,有效防止了油剂飞溅。
2) anti-splashinq agent
抗飞溅剂
3) splash
[英][splæʃ] [美][splæʃ]
溅，飞溅，喷溅
4) splashing
[英][splæʃ] [美][splæʃ]
飞溅，喷溅
5) spatter
[英]['spætə(r)] [美]['spætɚ]
飞溅
1.
Mechanism and influencing factors of spatter formation with self-shielded flux cored wire;
自保护药芯焊丝飞溅的形成机理及其影响因素
2.
Effect of Activating Flux on Appearance of Welds and Spatter in CO_2 Arc Welding;
活性剂对CO_2气体保护焊焊缝成形及飞溅的影响
3.
Investigation of spatter for CO_2 gas-shielded welding;
CO_2气体保护焊飞溅问题的研究
6) splash
[英][splæʃ] [美][splæʃ]
飞溅
1.
The results show that to use activation dosage can reduce welding splash rate greatly,increase weld fusion depth,widen fusion width,and increase depth and width ratio and fusion drops transition with thin particles.
结果表明,使用活性剂可以使焊接飞溅率大大降低,焊缝熔深增加,熔宽增大,深宽比增加,熔滴以细颗粒过渡。
2.
The abnormal currents are caused by splash.
飞溅将引起电流信号的异常变化。
3.
The effects of transfer shape about droplet, stress of droplet, gap between twin electrode, barrel form and motion manner of electrodes on splash factors of twin electrode single arc welding were studied by the high - speed photographs.
利用高速摄影等实验手段,研究了双电极焊条单弧焊熔滴过渡形态、熔滴受力、双芯间隙、焊条套筒形 式、双电极焊条焊接时运条方式等对飞溅的影响。
补充资料：α-型抗结晶抗絮凝酞菁蓝
分子式：
CAS号：
性质：红光蓝色粉末。属于稳定α-型晶相。具有良好的耐溶剂稳定性。在溶剂中不发生色光与晶型的转变。日晒牢度7～8级。以铜酞菁母体与甲醛缩合，其产物与N-羟甲基苯二甲酰亚胺反应，生成的N-羟甲基苯二甲酰亚胺衍生物与铜酞菁母体以1:10质量比混合，再经酸溶，析出，过滤，漂洗，干燥得最终产物。用于高档油墨、涂料及塑料的着色。
CAS号：
性质：红光蓝色粉末。属于稳定α-型晶相。具有良好的耐溶剂稳定性。在溶剂中不发生色光与晶型的转变。日晒牢度7～8级。以铜酞菁母体与甲醛缩合，其产物与N-羟甲基苯二甲酰亚胺反应，生成的N-羟甲基苯二甲酰亚胺衍生物与铜酞菁母体以1:10质量比混合，再经酸溶，析出，过滤，漂洗，干燥得最终产物。用于高档油墨、涂料及塑料的着色。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条