1) incremental bend forming
增量压弯
1.
Finite element simulation of stress and strain on the incremental bend forming technology of the integral wing-skin panel;
整体壁板增量压弯过程应力应变模拟
2.
In this paper, the incremental bend forming technology and finite element simulation are applied to form the panel.
研究表明:采用增量压弯成形工艺可以成形出具有一定曲率外形的整体壁板;压弯过程中蒙皮始终处于弹性变形阶段,筋条既有弹性变形产生,又有塑性变形产生;压下量达到一定值时,塑性变形的比率急剧增加。
2) constraining bend
增压弯曲
1.
More similar to the plate tectonic activity, the fault blocks between the strike\|slip fault plane converge near the constraining bend and diverge near the releasing bend.
研究认为 ,岩石圈断块沿郯庐断裂的走滑活动与大型板块构造的活动方式有一定的相似之处 ,即伴随着郯庐断裂的右行走滑 ,从断裂的增压弯曲部位到断裂的释压拉张部位将发生岩石圈断块的汇聚与离散现象 ,由此造成了走滑断裂带上增压弯曲部位与释压拉张部位局部应力场性质的不同 :增压弯曲部位应力相对集中 ,岩石圈断块发生汇聚、挤压、隆升 ;而释压拉张部位由于应力释放 ,岩石圈断块发生离散、伸展、沉降。
3) intermesh
[,intə(:)'meʃ]
压弯量
1.
The effect of entrance/exit leveler roller' intermesh to plate flatness;
矫直机入/出口矫直辊压弯量对板材不平度的影响
2.
The FEM analysis for the effect of intermesh to plate leveling deformation;
压弯量对轧件矫直变形影响的有限元分析
3.
According to elastic-plastic theory of beam, reverse bending deflection which is composed of elastic recovery deflection, residual deflection decides roller′ intermesh.
矫直机压下模型主要由入、出口矫直辊的压弯量设定和矫直辊的弯辊量设定组成。
4) increment tube bending program
增量弯管程序
5) Increment pressure
压强增量
6) delta compression
增量压缩
1.
The recorder can store the start and end time of a drive when storing the real time date, and use approach of delta compression when storing the speed date, and store the start and end time of mileage when storing the mileage.
压缩时对于时间只存储驾车的起止时间,对于车速采用增量压缩法,对于里程只需存储开始和结束计程的时间。
补充资料：长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条