小支撑,compact support,在线英语词典,英文翻译,专业英语

1) compact support

小支撑

B-splines is an easiest function which has compact support and is efficient to put into practice via software and hardware, so we use B-splines wavelet to detect welding seam edge.

基数B样条函数可以说是对于软件或硬件实现都是比较有效的具有小支撑的最简单的函数,文中采用B样条小波进行焊缝坡口边缘检测。

2) minimal support set

最小支撑集

Based on the area of support set, a function whose minimum determines the minimal support set (MSS) was constructed.

构造了基于支撑集面积的目标函数 ,其极小值点确定了最小支撑集 (MSS) 。

3) minimum spanning tree

最小支撑树

In this paper, aiming at the complicated web graph denoted by relation matrix ,based on the analysis of the features of the elements constituting the minimum spanning tree, two methods of getting the minimum spanning tree, method of directly getting and performing on the table, have been put forward.

针对关系矩阵表示的复杂网络图 ,分析构成其最小支撑树的元素特点 ,提出两种求最小支撑树的方法 :直接生成法和表上作业法。

The arithmetic of that a minimum spanning tree deletes edges with the largest weight is another algorithm,which is on the basis of Kruskal algorithm,Prim algorithm and the Deleting circults.

最小支撑树的一种删除大权边算法是在Kruskal算法、Prim算法和破圈法的基础上,提出的另一种算法。

The model of minimum spanning tree with multiple parameter is established.

建立了多参数最小支撑树问题 (RMST)的模型 ,并证明该问题是 NP-完全的。

4) minimal spanning tree

最小支撑树

This paper narrated and proved an minimal spanning tree algorithm which requires no consideration of circles.

从树的等价定义出发,叙述并证明了一种不必考虑圈的求最小支撑树的算法。

5) list sustained distance

最小支撑距离

6) minimal support invariant

最小支撑不变量

参考词条

最小支撑树问题最小支撑树灵敏度分析严格第k最小支撑树超细高纯硅酸铝

补充资料：多孔陶瓷支撑体膜

分子式：
CAS号：

性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引约束最小支撑树最小支撑入树最小支撑树（MST）最小支撑出树

1) compact support 小支撑 1. B-splines is an easiest function which has compact support and is efficient to put into practice via software and hardware, so we use B-splines wavelet to detect welding seam edge. 基数B样条函数可以说是对于软件或硬件实现都是比较有效的具有小支撑的最简单的函数,文中采用B样条小波进行焊缝坡口边缘检测。 2) minimal support set 最小支撑集 1. Based on the area of support set, a function whose minimum determines the minimal support set (MSS) was constructed. 构造了基于支撑集面积的目标函数 ,其极小值点确定了最小支撑集 (MSS) 。 3) minimum spanning tree 最小支撑树 1. In this paper, aiming at the complicated web graph denoted by relation matrix ,based on the analysis of the features of the elements constituting the minimum spanning tree, two methods of getting the minimum spanning tree, method of directly getting and performing on the table, have been put forward. 针对关系矩阵表示的复杂网络图 ,分析构成其最小支撑树的元素特点 ,提出两种求最小支撑树的方法 :直接生成法和表上作业法。 2. The arithmetic of that a minimum spanning tree deletes edges with the largest weight is another algorithm,which is on the basis of Kruskal algorithm,Prim algorithm and the Deleting circults. 最小支撑树的一种删除大权边算法是在Kruskal算法、Prim算法和破圈法的基础上,提出的另一种算法。 3. The model of minimum spanning tree with multiple parameter is established. 建立了多参数最小支撑树问题 (RMST)的模型 ,并证明该问题是 NP-完全的。 4) minimal spanning tree 最小支撑树 1. This paper narrated and proved an minimal spanning tree algorithm which requires no consideration of circles. 从树的等价定义出发,叙述并证明了一种不必考虑圈的求最小支撑树的算法。 5) list sustained distance 最小支撑距离 6) minimal support invariant 最小支撑不变量参考词条最小支撑树问题最小支撑树灵敏度分析严格第k最小支撑树超细高纯硅酸铝补充资料：多孔陶瓷支撑体膜分子式： CAS号：性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com