1) solvent-free alkyd resin
无溶剂醇酸树脂
1.
Determination of total content of rare earth in rare earth drier and content of hydroxyl in solvent- free alkyd resin are introduced and then compared with the traditional methods.
介绍了稀土催干剂中总稀土含量和无溶剂醇酸树脂中羟基含量的测定,并和传统方法作了比较。
2) solventless resin
无溶剂树脂
1.
The preparation methods of solventless resins for insulating material are introduced in the paper in detail by molecular designation mechanism,and especially,the synthetic mechanism and method of the resins arc summarized and analyze,including hyperbranched epoxy resin,hyperbranched polyimide,hyperbranched polysilane and hyperbranched unsaturated polyester.
依据分子设计原理阐述了合成绝缘材料用无溶剂树脂的方法,特别是对超支化环氧树脂、超支化聚酰亚胺、越支化有机硅树脂和超支化不饱和树脂的合成方法和原理。
2.
The preparation methods of solventless resins for insulating materials were planned according to general principles of molecular design.
阐述了绝缘材料用无溶剂树脂的合成方法,分析了超支化环氧树脂、超支化聚酰亚胺、超支化有机硅树脂和超支化不饱和树脂的合成方法、原理、结构及官能团与粘度的变化关系。
3) water-soluble alkyd resin
水溶性醇酸树脂
1.
A two-component waterborne polyurethane coatings is composed of part A formulated by water-soluble alkyd resin,pigments,fillers and additives,and part B containing modified hydrophilic polyisocyanate.
采用水溶性醇酸树脂、颜填料及助剂制备A组分,同亲水改性多异氰酸酯配合(B组分),制备双组分水性聚氨酯工业涂料。
2.
The synthesis of water-soluble alkyd resin by modified resin and preparation of priming paint were studied.
产物的耐热性表明,其具有良好的耐热性,用改性松香类水溶性醇酸树脂制备的底漆具有较好的性能。
3.
A general program of formulating of recipe suitable for self-drying water-soluble alkyd resin was established.
建立了适合于水溶性醇酸树脂配方设计的通用程序。
4) water soluble alkyd resin
水溶性醇酸树脂
1.
The effects of neutralizing agent,co-solvent and final acid value on the performances of water soluble alkyd resin were discussed by a series of contrast tests.
通过一系列对比实验,讨论了中和剂、助溶剂、树脂酸值对水溶性醇酸树脂水溶性及涂膜性能的影响,并讨论了其改性方法及其在工业领域中的应用,指出了水溶性醇酸树脂的发展趋势。
5) Solventless insulation resin
无溶剂绝缘树脂
1.
Series solventless insulation resins are introduced including their properties and application, especially fire retardance,low shrinkage,high anti-corrosion and heat resistance.
本文介绍了FUCHEM系列无溶剂绝缘树脂的性能及应用 ,着重探讨了产品的阻燃、低收缩、高耐腐蚀、高耐热等级等特
补充资料：醇酸树脂模塑料
分子式：
CAS号：
性质：用油或脂肪酸改性的醇酸树脂为基料制得的热固性成型料。适于低压下模塑、快速固化，固化时无挥发物放出，不存在排气问题。制品的相对密度多在2～2.2。尺寸稳定。收缩率0.4%～0.7%。具有自熄性。电性能优良。耐弧性好(约440s)。耐热。具有高的韧性。将改性的醇酸树脂、反应性单体、催化剂、填料和其他添加剂充分混合即得模塑料。适于制造电子和电工器件，如开关装置，绝缘子和发动机控制器零部件以及汽车的点火系统等。
CAS号：
性质：用油或脂肪酸改性的醇酸树脂为基料制得的热固性成型料。适于低压下模塑、快速固化，固化时无挥发物放出，不存在排气问题。制品的相对密度多在2～2.2。尺寸稳定。收缩率0.4%～0.7%。具有自熄性。电性能优良。耐弧性好(约440s)。耐热。具有高的韧性。将改性的醇酸树脂、反应性单体、催化剂、填料和其他添加剂充分混合即得模塑料。适于制造电子和电工器件，如开关装置，绝缘子和发动机控制器零部件以及汽车的点火系统等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条