1) electrogalvanized ZnNi coated steel sheet
电镀锌镍钢板
2) galvanized steel sheet
电镀锌钢板
1.
The composition and structure of passive film formed from CrO3-H3PO4SiO2, systems on galvanized steel sheet were inveshgated, the corrosion resistance and itsprotective causes of the film were also discussed.
研究了电镀锌钢板CrO3-H3PO4－SiO2体系纯化膜的成分与结构，并对钝化膜的耐蚀性及其原因进行了探讨。
3) electro-zinc coated sheet
电镀锌薄钢板
4) nickel-plated steel
镀镍钢板
1.
The effects of TiC coating on electrode tip surface on electrode degradation mechanism were studied during micro-resistance spot welding of nickel-plated steel to nickel sheet.
研究了表面处理对微型点焊镀镍钢板和镍板时电极失效的影响。
2.
The electrode degradation mechanism is studied during micro-resistance spot welding of nickel-plated steel to nickel sheet in the present paper.
本文主要研究了微型点焊镀镍钢板和镍板时电极失效的机制。
5) galvanized sheet steel
镀锌钢板
1.
The commercial hot-dip galvanized sheet steel was investigated for its corrosion behavior in three different seawater zones in Qingdao with electrochemical measurement,weight loss test and SEM.
开展了热镀锌钢板在青岛不同海水区带的实海腐蚀测试,并利用电化学测试、失重腐蚀测试和扫描电镜研究了镀层的海水腐蚀行为。
2.
With the rapid development of Chinese economy, demands for galvanized sheet steels increased significantly because of the rapid development of construction and automotive industry during the last decade.
随着国内经济的持续稳定发展,在过去的10年中,由于建筑和汽车行业的快速发展,对镀锌钢板的需求持续旺盛。
3.
occured in forming and after coating of the prephosphating galvanized sheet steel,this paper demonstrates analyses on all kinds of influential factors happened in production and forming in detail,after that,provides some solutions on purpose.
为解决预磷化镀锌钢板加工成形、涂装后易出现的条影、针孔、粗糙等问题,对其生产及加工成形过程中的各种影响因素进行了详细分析,并有针对性地提出一般的解决办法。
6) zinc coated steel
镀锌钢板
1.
Effect of TiC coating on electrode tip surface on electrode degradation during resistance spot welding zinc coated steel;
点焊镀锌钢板时电极表面熔敷TiC涂层对电极失效的影响
2.
Effect of zinc coating on arc heating behavior for joining Al and zinc coated steel by welding-brazing process
镀锌层对铝/镀锌钢板CMT熔-钎焊电弧加热行为的影响
3.
The effect of TiC coating in electrode tip surface on spheriform electrode degradation during resistance spot welding zinc coated steel was investigated by SEM,EDX and XRD.
利用SEM、EDX和XRD等方法分析了在点焊镀锌钢板时球形电极表面熔敷TiC涂层对电极失效的影响。
补充资料：低温镍钢
分子式：
CAS号：
性质：含碳(<0.13％)、少量锰(<1.5％)、有的含少量钼与铬的Fe-Ni合金。适合203K以下使用的低温镍钢％Ni是：1.5，2.5，3.5，5，5.5，8，9％Ni的镍钢。3.5％Ni及9钢的最低使用温度分别为173K及77K，这两种钢的应用比较广泛。低温镍钢可用于储存、处理及输送液态乙烯与甲烷、液化天然气、液氧、液氮等液化气的储罐装置及管道等。还有两种低温镍钢是12％Ni钢及13％Ni钢，可用于4～77K的低温条件。这两种钢都是完全的铁素体钢。
CAS号：
性质：含碳(<0.13％)、少量锰(<1.5％)、有的含少量钼与铬的Fe-Ni合金。适合203K以下使用的低温镍钢％Ni是：1.5，2.5，3.5，5，5.5，8，9％Ni的镍钢。3.5％Ni及9钢的最低使用温度分别为173K及77K，这两种钢的应用比较广泛。低温镍钢可用于储存、处理及输送液态乙烯与甲烷、液化天然气、液氧、液氮等液化气的储罐装置及管道等。还有两种低温镍钢是12％Ni钢及13％Ni钢，可用于4～77K的低温条件。这两种钢都是完全的铁素体钢。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条