1)  polyaminobismaleimide
聚氨双马来酰亚胺
1.
A series of epoxyimide monocomponent transparent glue had been obtained through the reaction of epoxy resin with polyaminobismaleimides(PABMI)as a epoxy curing agent derived from bismaleimide and aromatic amines.
双马来酰亚胺与芳香胺先行溶液预聚合,生成的聚氨双马来酰亚胺(PABMI)作为耐热固化剂,与环氧树脂共混制成一系列单组分透明胶液。
2)  polyurethane
聚氨酯
1.
Durability of polyurethane adhesive in NaCl solution under load;
外力作用下聚氨酯胶粘剂在NaCl水溶液中的耐久性
2.
Analysis of Hydrogen Bondings in Polyurethane Urea Cured in Graded Temperature Field by FTIR;
梯度固化聚氨酯脲中氢键的红外光谱分析
3.
Preparation and application of the silicone-polyurethane copolymer;
有机硅/聚氨酯共聚物的制备研究与应用
3)  PU
聚氨酯
1.
Study of preparation and properties on epoxy resin adhesive modified by PU;
聚氨酯改性环氧树脂胶粘剂的制备及性能研究
2.
Preparation and Characterization of EP/PU IPN with Continuous Graded Structure;
环氧/聚氨酯IPN连续梯度材料的制备和表征
3.
Preparation of PTFE/PU composite membrane;
膨体聚四氟乙烯微孔-聚氨酯复合膜的制备
4)  Polyurethane
聚氨脂
1.
This article introduces the technology of trimming the aditus department of the thin-wall barrel-type piece based on the principles of transversal truncation about the polyurethane rubber.
基于聚氨脂橡胶横向截切原理介绍了薄壁筒形件口部修边的工艺方法,根据其剪切机理研制了修边模具,叙述了模具结构及主要工作零件的设计。
2.
Adopting polyurethane and wooden bolt to ahead strengthen three soft seam wall can efficiently control coal wall fall at combined face,speed up the mining speed.
利用聚氨脂等锚固剂加木锚杆 ,对三软煤层煤壁进行超前加固 ,有效地控制了综采工作面的煤壁片冒问题 ,加快了综采推进度 ,取得了较好的技术经济效
3.
The details were described in the developrnent of magnetic materials and foamed polyurethane plastics through determination of the geometry of dispersed phase in the materials by image analysis.
文中阐述了图像分析技术在新材料研制中的应用,具体介绍在塑料磁体、聚氨脂泡沫塑料研制中利用该技术对多相体系中分散相形态进行的定量测量。
5)  polyurethane adhesive
聚氨酯胶
1.
The polyurethane adhesive has good toughness and adherence, and better wear-resistance than steel in liquid medium, so it could be grouted under fluid state and solidified under normal temperature and used for strengthening hydraulic structures conveniently.
聚氨酯胶在液体介质中耐磨性能优于钢铁 ,韧性好 ,粘接力强 ,具有可液态灌注、涂刷方便、常温固化和易于施工的特点 ,介绍其在水工建筑物上的应用。
6)  polyurethanes
聚氨酯
1.
Synthesis and Properties of Optically Active Polyurethanes Containing 1,1'-Binaphthyl Unit;
新型含联萘基团的旋光聚氨酯的制备与性能表征
2.
Study on a rigid polyurethanes foam plastics;
硬质聚氨酯泡沫塑料的开发
3.
The research and applications of shape memory polyurethanes;
形状记忆聚氨酯的研究与应用
参考词条
补充资料：聚双马来酰亚胺
分子式：
CAS号：

性质：又称聚顺丁二酰亚胺或双马型聚酰亚胺。由双马来酰亚胺中间体制备的聚合物，是加成型聚酰亚胺中一类重要品种。由顺丁烯二酸酐与二元胺在二甲基甲酰胺或丙酮中反应，然后经脱水和化学酰亚胺化，形成双马来酰亚胺中间体(BMI)，再经加成聚合反应形成交联结构的聚双马来酰亚胺。中间体溶于二甲基甲酰胺等强极性溶剂，熔融黏度低，固化过程中无低分子物释放，适宜作耐高温结构胶黏剂、绝缘浸渍漆、模塑料，尤其适用作高性能复合材料基体树脂。均聚物的玻璃化温度大于300℃，可在180～230℃长期使用，因性脆限制了应用。改性的方法很多：(1)合成不同组成或结构的二元胺以及氨基封端的芳醚砜、芳醚酮、有机硅、酰胺-酰亚胺或介晶单元的预聚物，制备相应的双马来酰亚胺中间体；(2)马来酰亚胺双键与含NH2-，-NH-，-OH，-SH等活性氢的化合物经Michael反应共聚，与苯并环丁烯、桐油等亲二烯体经Diels-Alder反应共聚，与烯丙基类化合物经“ene”反应共聚，与乙烯基单体共聚；(3)与环氧树脂、酚醛树脂进行共混改性。各种改性品种，已在航空航天、机械、电子、电机电器、国防等工业部门得到广泛应用，正迅速发展中。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。