说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
您的位置：首页 -> 词典 -> 共聚丙烯
1)  co-polypropylene
共聚丙烯
1.
In this paper, we perform experiments upon polypropylenes(PP2401) and co-polypropylenes (PP1330) that produced by 841-catalyst and TK-catalyst.
对分别使用841催化剂和TK催化剂生产的均聚丙烯(PP2401)和共聚丙烯(PP1330)两类聚丙烯四种材料进行拉伸试验、弯曲试验和冲击试验等三种测试,从测试结果比较四种材料间的力学性能差异,为国内聚丙烯生产厂家根据力学性能的不同要求选择不同催化剂进行生产提供一定的参考依据,并为国产催化剂的改良提供一定的信息。
2.
Using the dynamic stress rfieometer, we perform experiments upon polypropylenes(PP2401) and co-polypropylenes( PP1330) that produced by 841-catalyst and TK-catalyst.
利用动态应力流变仪(DSR),对分别使用841催化剂和TK催化剂生产的均聚丙烯(PP24O1)和共聚丙烯(PP1330)两类聚丙烯四种材料进行动态应力扫描、动态频率扫描和稳态剪切三种测试,从测试结果比较四种材料间的粘弹性差异。
2)  co-polypropylene
共聚聚丙烯
1.
Effect of Processing Parameters on Shrinkage of Injection Molded Co-polypropylene;
注射成型工艺条件对共聚聚丙烯成型收缩率的影响
2.
This paper studied the influence of compressed specimen thickness to fracture parameters of a co-polypropylene.
采用基本断裂功法对共聚聚丙烯压制双边缺口拉伸试样的断裂行为进行研究,分析了厚度变化对材料多项断裂参数的影响。
3.
Grafting of maleic anhydride(MAH)and styrene onto co-polypropylene(PP)was performed respectively via reactive extrusion by a two-screw extruder.
用双螺杆挤出机分别制备了马来酸酐(MAH)和MAH-苯乙烯(St)共单体接枝共聚聚丙烯(PP)。
3)  propylene copolymer
共聚聚丙烯
1.
Analysis of injection moulding process of propylene copolymers;
共聚聚丙烯注射成型工艺分析
2.
Properties and structure of propylene copolymer with high MFR for automobile;
汽车用高流动性共聚聚丙烯的结构与性能
3.
Development of impact propylene copolymer with high melt flowability;
高流动抗冲共聚聚丙烯开发进展
4)  polypropylene copolymer
共聚聚丙烯
1.
The crystallization and melting behavior of isotactic polypropylene (iPP) and polypropylene copolymer (co-PP) containing silicon dioxide (SiO2) were investigated using differential scanning calorimeter (DSC) and X-ray diffraction.
通过差示扫描量热仪(DSC)和X射线衍射分别研究了二氧化硅(SiO2)粒子填充等规聚丙烯(iPP)和共聚聚丙烯(co-PP)复合材料的结晶行为和晶体结构。
2.
The results show that the notched impact strength of polypropylene copolymer/CaCO3 composites comprising 1.
以双螺杆挤出机制备了高密度聚乙烯(HDPE)增韧共聚聚丙烯(PP)/CaCO3(质量比50。
5)  copolymerized polypropylene
共聚聚丙烯
1.
The effects of high fluid polypropylene, molcular weight regulator, talcum powder and technical para-metres on the flowability of EPS30R copolymerized polypropylene produced by Qilu petrochemical company were discussed.
以齐鲁石化公司产高韧性共聚聚丙烯(PP)EPS30R为基体树脂,观察了在其中共混高流动性PP、相对分子质量调节剂或滑石粉、改变工艺参数等因素对其流动性能的影响。
6)  copolyacrylonitrile
共聚丙烯腈
1.
Properties of copolyacrylonitrile prepared with different monomers
不同第二单体共聚丙烯腈纤维的性能
补充资料：2-丙烯酰胺与2-丙烯酸和2-丙烯腈共聚物
CAS: 26982-19-4
分子式: (C3H5NO·C3H4O2·C3H3N)x
中文名称: 2-丙烯酰胺与2-丙烯酸和2-丙烯腈共聚物

英文名称: 2-Propenoic acid, polymer with 2-propenamide and 2-propenenitrile
Acrylamide, acrylonitrile, acrylic acid copolymer
Acrylonitrile, acrylamide, acrylic acid polymer
2-Propenoic acid,polymer with 2-propenamide and 2-propenenitrile
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条