说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 累计误差
1)  accumulative error
累计误差
1.
The paper introduced that the electronic weigh scale replaced with the intelligent weight system to reduce accumulative error for urea packing.
应用电子智能称重系统包装尿素,使称重精确度批累计误差趋于零。
2.
Most of the existing 3D geometry compression algorithms employ two strategies: successive quantization and predictive coding, and induce accumulative error.
已有的三维几何数据压缩算法中几何信息普遍采用连续量化和预测编码策略,存在较严重的累计误差,这一误差是由预测点的值在编码前后不一致带来的。
3.
Some analyses have been done to the process of the metal magnesium matching-material problem, and one three-steps matching-material control algorithm is developed arming to minimize the accumulative errors.
介绍了我们设计的微机配料系统,通过对金属镁微机配料系统工艺过程的分析,提出了一种能够减小配料累计误差的三步配料控制算法,并将其应用于微机配料系统中。
2)  accumulative errors
累计误差
1.
To overcome the disadvantage of image match based image gray,the paper first gives the definition of "image trace",then by computing the trace difference of images and geting the least value of accumulative errors,it finishes the im.
文章正是针对基于灰度的图像匹配速度较慢的弊端,首先给出了“图像迹”的定义,然后通过计算图像的迹差,求累计误差的最小值进行图像匹配。
3)  residual cumulativ error
残余累计误差
4)  dynamic accumulation error
动态累计误差
5)  accumulated error
累积误差
1.
Accumulated error control technique applied in small mass production of piece;
累积误差控制技术在单件小批量生产中的应用
2.
This paper introduces the principle of the 3D Optix laser scanner briefly,discusses the method of improving the data accuracy in single piece measurement and reducing the accumulated error of spliced joint in multi-pieces measurement with an applied example.
简要介绍3D Optix扫描仪的测量原理,并结合一测量实例探讨提高单片点云数据测量精度及减小多片点云数据拼接累积误差的方法。
3.
Firstly,the nonlinear problem and the cause of accumulated error for inertial strapdown attitude solution were analyzed.
采用低精度的微惯性陀螺和加速度计作为微惯性捷联姿态确定系统元件,首先分析了捷联惯性姿态解算的非线性问题和误差累积的原因;根据姿态三角函数关系引入横滚、俯仰角的3个替换变量作为状态变量,并根据状态变量之间的约束方程和运动体前向速度测量,建立了捷联惯性姿态的一种扩展卡尔曼滤波模型;采用MTi微惯性捷联测量组合进行实验,将该扩展卡尔曼滤波方法解算载体姿态结果与捷联姿态解算结果相比较,验证了该方法抑制惯性姿态解算累积误差的能力。
6)  accumulative error
累积误差
1.
With the purpose to reduce influence of accumulative error from the recurrence formula of residual stress measured with magnetic stress meter on the calculation result,based on the consideration that the stress at a same measuring point has no relation to the measuring order,the author proposed an improved calculation method for the work piece with free boundaries on both ends.
为了减小CCY-84型磁测应力仪残余应力递推公式中累积误差对计算结果的影响,针对两端自由边界的工件,基于同一测点应力与其测量顺序无关的思路提出了改进的计算方法,并在实际测量770mm×1200mm×2820mm球墨复合铸铁轧辊工作层残余应力中得到了应用。
补充资料:分累计产额
分子式:
CAS号:

性质:裂变产物链中某核素的累计产额占该链的链产额的份额。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条