1) discharge pulse
放电脉冲
1.
An new method of programmable adjusting and controlling time parameters of discharge pulse;
放电脉冲时间参数可编程调控的一种新方法
2) pulse discharge
脉冲放电
1.
Laboratory study on coking wastewater with high voltage pulse discharge plasma;
高压脉冲放电处理焦化废水的研究
2.
A test of demulsification of emulsions by high voltage pulse discharge plasma;
高压脉冲放电等离子体破乳作用试验研究
3.
Effect of Ratio Between Occupation and Empty on Hardness and Wear Resistance of Pulse Discharge Coating on M_(2) High Speed Steel;
占空比对M_2高速钢脉冲放电强化层硬度和耐磨性的影响
3) pulsed discharge
脉冲放电
1.
Simulation of NO removal by using pulsed discharge;
脉冲放电NO脱除过程模拟
2.
Treatment of wastewater from azo dye production by pulsed discharge plasma technology;
脉冲放电等离子体技术处理偶氮染料废水
3.
A review of pulsed discharge for SO_2 and NO_x removalfrom flue gas;
脉冲放电烟气脱硫脱硝技术研究进展
4) pulse discharging
脉冲放电
1.
The effect of the pulse discharging parameters on the formation and hardness of the TiC coating was investigated.
采用液相脉冲放电技术对机械切削加工工具材料表面进行改性,具有很大的经济效益。
2.
It points out that the pulse discharging between tooth and work pieces on tool plate can make the surface to melt or even vaporize, thus to process the eclipse divided by metals.
并指出:工具盘上的轮齿与工件间的脉冲放电可使工件表面熔化甚至汽化,从而达到加工蚀除金属的目的。
3.
In this paper,the super rapid heating hardening of 45 steel samples by means of condenser block pulse discharging is introduced.
利用电容器组脉冲放电装置对 45钢施行快速加热淬火 ,加热速度可达 10 6℃ /s,功率密度可达 10 5W/cm2 。
5) pulse corona discharge
脉冲放电
1.
Technique combining desulfurization, denitrification by pulse corona discharge and dust precipitation of flue gas;
脉冲放电烟气脱硫脱硝与除尘相结合工艺研究
2.
Study on pulse corona discharge for the removal of refinery odors;
脉冲放电等离子体治理炼油厂恶臭气体研究
3.
Particle charge in pulse corona discharge process;
脉冲放电粒子荷电机理的研究
6) pulse current discharge
脉冲放电
1.
Numerical simulation on the current flowing over and shielding of crack prevention in metal concave die with multi cracks at the moment of the pulse current discharge;
含多裂纹的金属凹模脉冲放电止裂瞬间绕流屏蔽效应的数值模拟
2.
Oblique crack arrest of super hardness aluminium alloy specimens by pulse current discharge
超硬铝合金试件中斜裂纹脉冲放电止裂
3.
Experimentation and numerical simulation are proposed for studying half-embedding crack prevention in metal die of 9Cr2 steel by pulse current discharge.
文章采用实验和数值模拟分析方法研究了对带有半埋藏裂纹的9Cr2凸模进行脉冲放电,实施电磁热止裂。
补充资料：电容放电脉冲加热法
分子式：
CAS号：
性质：提高原子吸收石墨炉升温速率的方法。以电容放电供电方式，对石墨管原子化器供给瞬间大电流，进行脉冲加热，实现快速升温(100K/ms)。用各向异性热解石墨管产生等温条件。保证试样迅速原子化的技术。
CAS号：
性质：提高原子吸收石墨炉升温速率的方法。以电容放电供电方式，对石墨管原子化器供给瞬间大电流，进行脉冲加热，实现快速升温(100K/ms)。用各向异性热解石墨管产生等温条件。保证试样迅速原子化的技术。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条